Pen and Stationery Storage Box (Screwless, Roller Shutter Door, A1 mini Printable)

Pencil Case Stationery Storage Box (Roll-up Door, Screw-free, A1 mini Printable)
Pencil Case and Stationery Storage Box (Roll-up Door, Screw-free, A1 Mini Printable)

My daughter and I both really like this model. It's very convenient and aesthetically pleasing for holding pens, bar tools, or some miscellaneous items. However, the original model required screws to be fixed and was too large; my A1 mini couldn't print it. So I redesigned this model: it no longer requires screws (replaced with elastic snap-fit connections), optimized the size so that the A1 mini can print it, added a hand grip space for the door handle, and improved the snap-fit parts on both sides so that the bottom won't collapse when pressed, and more.

Model dimensions: 200mm (length) * 50mm (width) * 50mm (height)

Notes:
1. When assembling, first insert the roller shutter, and make sure all snaps are aligned before pressing in.
2. If you want smoother opening and closing, you can apply some petroleum jelly on both sides of the roller shutter.
3. For disassembly, a crowbar is needed (once assembled, it is very tight; do not disassemble unless necessary).

4. It is recommended to print the door and connectors using PETG.

I hope everyone likes this model :)

My daughter and I both really like this model. It's very convenient and aesthetically pleasing for holding pens, bar tools, or some miscellaneous items. However, the original model required screws to be fixed and was too large; my A1 mini couldn't print it. So I redesigned this model: it no longer requires screws (replaced with elastic snap-fit connections), optimized the size so that the A1 mini can print it, added a hand grip space for the door handle, and improved the snap-fit parts on both sides so that the bottom won't collapse when pressed, and more.  

Model dimensions: 200mm (length) * 50mm (width) * 50mm (height)  

Notes:  
1. When assembling, first insert the roller shutter, and make sure all snaps are aligned before pressing in.  
2. If you want smoother opening and closing, you can apply some petroleum jelly on both sides of the roller shutter.  
3. For disassembly, a crowbar is needed (once assembled, it is very tight; do not disassemble unless necessary).  

4. It is recommended to print the door and connectors using PETG.

I hope everyone likes this model :)

Original models list:

Worx 20V BigFoot (Green) Lithium Battery Holder V2 - [20251228] ★★★★

Pencil Case and Stationery Storage Box (Screwless,Roll-up, A1m Printable)-
Pencil Case and Stationery Storage Box (Screwless,Roll-up, A1 mini Printable) - [20251019] ★★★★

A1 mini TPU special top spool holder - [20250808] ★★★

LED Lamp-MH001 Ultra Practical Component - [20250701] ★★★★★

Wired battery compartment (with lid):18650, 21700 - [20250629] ★★★

Potentiometer knob (6mm fit) - [20250401] ★★★

Rotary shaft with Automatic rewinding:AMS lite, A1, A1 mini- [20240412] ★★★★★

A1 / A1 mini fan Cover Guard - [20240226] ★★★

AMS Lite Large diameter spool adapter - [20231127] ★★★★

see more original model…

see more original model…