FullGyro4 Nuts Fidget Spinner

Introduction

You will go nuts over this new range in my Gyro and Spinner Family. The Hex Nut provides smooth and angled edges to bring both sensations to your fingers which will delight your sensibilities. This is a working Hex Nut with an optional nut and hex bolt.

Commercial License

Do you want to sell prints of this model? Purchase a membership from my Patreon to obtain a commercial license.

IMPORTANT!

I have hand tremors and cannot stand unaided, the animations are the best I could manage, these are the reasons for the visible shaking, there wasn't an earthquake during my attempt to capture the spin.

FullGyro4 Nuts

Let me introduce you to FullGyro4 Nuts measuring 60mm diameter by 16mm thick with 4 sections, all 4 are gyro connected. The central section has a working thread that connects to the optional nut and bolt that can extend the span of the fingers to allow you an increased spin and kinetic energy on your Gyro. This range has been weighted towards the specific spinning elements in play for each in the range.

Optional Nut and Bolt

You can benefit from the optional nut and bolt. Screw the bolt through the centre and attach the bolt. This increases the width of the central section.

These are optional, you do not need them to operate the Spinner. The bolt screws through the central section and the nut attaches at the other side.

• Nut
• Bolt

Caution

This may drive people nuts, those with a weak disposition should be cautious before going fully nuts, for the sanest members of your whole family.

Family

You can find all the models in my Gyro and Spinner Family collection. You can also see the individual family members below:

• Launching Bulge range: Gyro4 Bulge
   

• Launched Nuts range: Gyro4 Nuts, Spinner4 Nuts & FullGyro4 Nuts.

   

• Pumpkin: Gyro4 Pumpkin, Spinner4 Pumpkin & FullGyro4 Pumpkin
• Hearts: Gyro4 Hearts, Spinner4 Hearts & FullGyro4 Hearts
• Bubbles: Gyro5 Bubbles, Spinner5 Bubbles & FullGyro5 Bubbles
• BigRings: Gyro4 BigRings, FullGyro4 BigRings & Spinner3 BigRings Chunky
• CrissCross: Gyro4 CrissCross, Spinner4 CrissCross & FullGyro4 CrissCross
• Originals: Gyro4, Full Gyro4 & Spinner4
• Twists: Gyro4 Twist , Spinner4 Twist & FullGyro4 Twist
• Spiky: SpikyGyro, SpikySpinner & SpikyFullGyro
• Spiked: Gyro3 Spiked, Spinner3 Spiked & FullGyro3 Spiked
• Keyrings: Keyring Gyro & Keyring Gyro Spinner
• Mini: Gyro4 mini & FullGyro4 mini
• Big: BigGyro

Statistics

• 60mm diameter
• 16mm thick
• 4 sections
• All 4 sections are gyros with a fixed direction of spin
• Optional Nut and Bolt
• Nut-style outer edge
• Gorgeous 1.6mm etched sections
• Weighty for fast spins

With and without AMS

• Edges AMS - The Middle textured section is a different colour from the top and bottom
• Single Colour - all the same colour
• Edges PAUSE (no AMS required) - The middle textured section is a different colour from the top and bottom

Filaments Used in Photos

• Bambu Lab PLA Metal Iridium Gold
• Bambu Lab PLA Metal Copper Brown