FullGyro4 CrissCross Fidget Spinner by MalcTheOracle

MalcTheOracle

Toys & Games>Other Toys & Games

Print Profile(7)

All

P1S

P1P

X1 Carbon

X1E

A1 mini

Single, 0.2mm layer, 2 walls, 15% infill

Designer

55 min

1 plate

5.0(3)

Edges AMS, 0.2mm layer, 2 walls, 15% infill

Designer

57 min

1 plate

5.0(1)

Triple AMS, 0.2mm layer, 2 walls, 15% infill

Designer

58 min

1 plate

Dual AMS, 0.2mm layer, 2 walls, 15% infill

Designer

1.3 h

1 plate

Click to see more

Open in Bambu Studio

Boost

112

Released

Description

Introduction

With the fastest spin yet in my fidget family, the CrissCross edge provides an excellent outer weight and a sensational touch. Do you need something with a decent spin in multiple ways?

Gyro4 CrissCross

Let me introduce you to Gyro4 CrissCross measuring 53mm diameter by 16mm thick with all 4 gyro sections, this is the fastest one yet.

Caution

This may cause a joyous sensation to your fingers, suitable for the whole family.

Experiments with Filaments

I tried the new CrissCross range with additional filaments this time. I have found that the Bambu Lab ranges of PETG HF and PETG Translucent create brilliant spins. If you have filaments from these ranges, try them with any of my Fidget Gyros and Spinners. All the filaments I used are listed below.

Family

You can find all the models in my Gyro and Spinner Family collection. You can also find the individual family members below:

Launching Ribbed* range: Gyro4 Ribbed*, Spinner4 Ribbed* & FullGyro4 Ribbed*.
Launched Twist5 range: Gyro5 Twist, Spinner5 Twist & FullGyro5 Twist.
Launched Bulge range: Gyro4 Bulge, Spinner4 Bulge & FullGyro4 Bulge.
Nuts: Gyro4 Nuts, Spinner4 Nuts & FullGyro4 Nuts
Pumpkin: Gyro4 Pumpkin, Spinner4 Pumpkin & FullGyro4 Pumpkin
Hearts: Gyro4 Hearts, Spinner4 Hearts & FullGyro4 Hearts
Bubbles: Gyro5 Bubbles, Spinner5 Bubbles & FullGyro5 Bubbles
BigRings: Gyro4 BigRings, FullGyro4 BigRings & Spinner3 BigRings Chunky
CrissCross: Gyro4 CrissCross, Spinner4 CrissCross & FullGyro4 CrissCross
Originals: Gyro4, Full Gyro4 & Spinner4
Twist4: Gyro4 Twist , Spinner4 Twist & FullGyro4 Twist
Spiky: SpikyGyro, SpikySpinner & SpikyFullGyro
Spiked: Gyro3 Spiked, Spinner3 Spiked & FullGyro3 Spiked
Keyrings: Keyring Gyro & Keyring Gyro Spinner
Mini: Gyro4 mini & FullGyro4 mini
Big: BigGyro

Statistics

55mm diameter
16mm thick
4 sections
3 are gyro with fixed direction of spin
1 centre section is free-spinning so you can get speed up
Comfortable twist-based textured outer edge
Deep 2mm etched sections
Weighty for fast spins

With and without AMS

Edges AMS - The Middle textured section is a different colour from the top and bottom
Triple AMS - three equal colours
Dual AMS - two equal colours
Single Colour - all the same colour
Edges PAUSE (no AMS required) - The middle textured section is a different colour from the top and bottom
Triple PAUSE (no AMS required) - three equal colours
Dual PAUSE (no AMS required) - two equal colours

Filaments Used in Photos

Bambu Lab - PLA Basic Red
Bambu Lab - PLA Basic White
Bambu Lab - PLA Basic Blue
Bambu Lab - PLA Basic Bambu Green
Bambu Lab - PETG HF Red
Bambu Lab - PETG HF Orange
Bambu Lab - PETG HF Green
Bambu Lab - PETG Translucent Orange
Bambu Lab - PETG Translucent Light Blue
Bambu Lab - PLA Basic Yellow

Comment & Rating (10)

@WLMCr8s

Print Profile

Single, 0.2mm layer, 2 walls, 15% infill

Enjoy all the line of gyros

The designer has replied

@MalcTheOracle

You are genius who speaks the truth about their love of great design. There are more coming. I love making them, some are hits, some less so, but, I enjoy them all.

@user_243324069

What's the difference between the Gyro and FullGyro?

The designer has replied

@MalcTheOracle

I usually create three styles for each range, they function as follows: - Gyro - The outer rings are connected by pins that makes them spin at 90º to the previous section (gyroscopically), the centre section is free-spinning - Spinner - All sections are free-spinning, you can spin them at any angle to the previous sections - FullGyro - Is the Gyro with ALL sections gyroscopically connected with no free-spinning sections. You get to choose which ones you prefer or print them all. Cheers

@Joe3ds

Print Profile

Single, 0.2mm layer, 2 walls, 15% infill

The designer has replied

@MalcTheOracle

Thank you, I really appreciate it. Brand new range Hearts has begun its launch. https://makerworld.com/en/models/612738 New models coming very soon. The other ranges:- - Originals - Mini - Big - Spiky - Spiked - Twist - CrissCross - Bubbles - Keyrings - BigRings & BigRings Chunky Lots to choose from for all ages and all needs. Family: https://makerworld.com/en/collections/1848447 You can now follow collections.

@milks

Print Profile

Edges AMS, 0.2mm layer, 2 walls, 15% infill

The designer has replied

@MalcTheOracle

Thank you, I really appreciate it. Brand new range has just begun its launch: Gyro5 Bubbles. https://makerworld.com/en/models/612738 New models coming very soon. The other ranges:- - Originals - Mini - Big - Mini - Spiky - Spiked - Twist - CrissCross - Keyrings - BigRings & BigRings Chunky Lots to choose from for all ages and all needs. Family: https://makerworld.com/en/collections/1848447 You can now follow collections.

@jennmakani

Print Profile

Single, 0.2mm layer, 2 walls, 15% infill

The designer has replied

@MalcTheOracle

No more

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.