Spinner4 CrissCross Fidget Spinner

Introduction

With the fastest spin yet in my fidget family, the CrissCross edge provides an excellent outer weight and a sensational touch. Do you need something with a decent spin in multiple ways?

Spinner4 CrissCross

Let me introduce you to Spinner4 CrissCross measuring 55mm diameter by 16mm thick with 4 free-spinning sections including the centre section, this is a comfortable Fidget Spinner.

Caution

This may cause a joyous sensation to your fingers, suitable for the whole family.

Experiments with Filaments

I tried the new CrissCross range with additional filaments this time. I have found that the Bambu Lab ranges of PETG HF and PETG Translucent create brilliant spins. If you have filaments from these ranges, try them with any of my Fidget Gyros and Spinners. All the filaments I used are listed below.

Family

You can find all the models in my Gyro and Spinner Family collection. You can also find the individual family members below:

• Launched: Gyro5 Bubbles, Spinner5 Bubbles & FullGyro5 Bubbles.
   
• BigRings: Gyro4 BigRings, FullGyro4 BigRings & Spinner3 BigRings Chunky
• CrissCross: Gyro4 CrissCross, Spinner4 CrissCross & FullGyro4 CrissCross
• Originals: Gyro4, Full Gyro4 & Spinner4
• Twists: Gyro4 Twist , Spinner4 Twist & FullGyro4 Twist
• Spiky: SpikyGyro, SpikySpinner & SpikyFullGyro
• Spiked: Gyro3 Spiked, Spinner3 Spiked & FullGyro3 Spiked
• Keyrings: Keyring Gyro & Keyring Gyro Spinner
• Mini: Gyro4 mini & FullGyro4 mini
• Big: BigGyro

Statistics

• 55mm diameter
• 16mm thick
• 4 sections
• 3 are gyro with fixed direction of spin
• 1 centre section is free-spinning so you can get speed up
• Comfortable twist-based textured outer edge
• Deep 2mm etched sections
• Weighty for fast spins

With and without AMS

• Edges AMS - The Middle textured section is a different colour from the top and bottom
• Triple AMS - three equal colours
• Dual AMS - two equal colours
• Single Colour - all the same colour
• Edges PAUSE (no AMS required) - The middle textured section is a different colour from the top and bottom
• Triple PAUSE (no AMS required) - three equal colours
• Dual PAUSE (no AMS required) - two equal colours

Filaments Used in Photos

• Bambu Lab - PLA Basic Red
• Bambu Lab - PLA Basic White
• Bambu Lab - PLA Basic Blue
• Bambu Lab - PLA Basic Bambu Green
• Bambu Lab - PETG HF Red
• Bambu Lab - PETG HF Orange
• Bambu Lab - PETG HF Green
• Bambu Lab - PETG Translucent Orange
• Bambu Lab - PETG Translucent Light Blue
• Bambu Lab - PLA Basic Yellow