FullGyro4 Pumpkin Fidget Spinner - Jack-o'-lantern

Introduction

This is the first time I have created a themed and shaped range in my Gyro and Spinner Family. The pumpkin edge is very pleasing to the touch while maintaining more than the perfect spin. You can choose between two edge styles and two optional stem styles.

The optional stems will limit the spin ability of the centre section, this is due to the central section being gyro-connected. Other sections spinning and for decoration when sitting down, these are perfect.

Commercial License

Do you want to sell prints of this model? Purchase a membership from my Patreon to obtain a commercial license.

IMPORTANT!

I have hand tremors and cannot stand unaided, the animation is the best I could manage, these are the reasons for the visible shaking, there wasn't an earthquake during my attempt to capture the spin.

FullGyro4 Pumpkin

Let me introduce you to FullGyro4 Pumpkin measuring 60mm diameter by 20mm thick with 4 sections, all areconnected using gyro pins, the first to sport a themed edge and the first to come with two edge style choices. The optional stems can increase the spin angle and potential kinetic energy.

Scary Face

FullGyro4 Pumpkin comes with the choice of a scary face (Jack-o'-lantern) being etched into the pumpkin edge in addtiton to the version without it.

Optional Stems

Two styles of Stems are provided, you choose which you prefer, they are entirely optional, and you do not need one (or two) to operate the Spinner. They screw into the body at the top and bottom if you like.

• Without stem cover
• With stem cover

Caution

This may be scary to some people, please carefully choose who gets to play with this special edition, for the brave members of your whole family.

Profiles

• Face [Single]
• No Face [Single]
• Stems
• Face [AMS]
• No Face [AMS]
• Face [PAUSE]
• No Face [PAUSE]

Family

You can find all the models in my Gyro and Spinner Family collection. You can also see the individual family members below:

• Launched Nuts range: Gyro4 Nuts, Spinner4 Nuts & FullGyro4 Nuts now available.
• Launched Hearts range: Gyro4 Hearts, Spinner4 Hearts & FullGyro4 Hearts now available.
   
• Bubbles: Gyro5 Bubbles, Spinner5 Bubbles & FullGyro5 Bubbles
• BigRings: Gyro4 BigRings, FullGyro4 BigRings & Spinner3 BigRings Chunky
• CrissCross: Gyro4 CrissCross, Spinner4 CrissCross & FullGyro4 CrissCross
• Originals: Gyro4, Full Gyro4 & Spinner4
• Twists: Gyro4 Twist , Spinner4 Twist & FullGyro4 Twist
• Spiky: SpikyGyro, SpikySpinner & SpikyFullGyro
• Spiked: Gyro3 Spiked, Spinner3 Spiked & FullGyro3 Spiked
• Keyrings: Keyring Gyro & Keyring Gyro Spinner
• Mini: Gyro4 mini & FullGyro4 mini
• Big: BigGyro

Statistics

• 60mm diameter
• 20mm thick
• 4 sections
• All 4 are connected using gyros with a fixed direction of spin
• With or without a scary face
• Pumpkin-style outer edge
• Perfect 1mm etched sections
• Weighty for fast spins

With and without AMS

• Edges AMS - The Middle textured section is a different colour from the top and bottom
• Triple AMS - three equal colours
• Dual AMS - two equal colours
• Single Colour - all the same colour
• Edges PAUSE (no AMS required) - The middle textured section is a different colour from the top and bottom
• Triple PAUSE (no AMS required) - three equal colours
• Dual PAUSE (no AMS required) - two equal colours

Filaments Used in Photos

• Bambu Lab - PLA Basic Orange
• Bambu Lab - PLA Basic Bambu Green
• Bambu Lab - PLA Basic Mistletoe green
• eSun - PLA+ Orange
• eSun - PLA+ Pine Green