Artwork | Hunter of The Night | 2024
Artwork | Hunter of The Night | 2024
Print Profile(1)
Description
Artwork : Hunter of the Night
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 133.33x199.99mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 2.2mm
Filaments Used:
PLA BambuLab Basic Black Transmission Distance: 0.6
PLA BambuLab Basic Blue Transmission Distance: 4
PLA BambuLab Basic Pink Transmission Distance: 8
PLA BambuLab Basic Jade White Transmission Distance: 5
This print uses 4 unique filaments
Swap Instructions:
Start with Black
At layer #7 (0.64mm) swap to Blue
At layer #13 (1.12mm) swap to Pink
At layer #19 (1.6mm) swap to Jade White for the rest.
Looking Holder & Stand?
Dont worry i gotcha! Here you will find normal version suitable for this model!
https://makerworld.com/en/models/134557#profileId-163687
Dont forget check my Profile Page lot of more artwork out!
https://makerworld.com/en/@StatusD112
Support Artists! follow and like!
Comment & Rating (0)
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
