Wraps the edges of a Printed Solid Jesse 1kg cardboard spool with 200mm diameter

Features

• Improves contact and rotation in the AMS
• Protective layer to prevent cardboard from deteriorating and cardboard dust damaging the AMS
• Integrated filament clip (optional)
• Name clearly visible to identify what spool it is for
• Avoids blocking filament holes in the cardboard spool

Instructions

• Measure your spool first to ensure the diameter matches the adapter (200mm)
• The ‘right' ring has the filament clip must be on the right side when the spool is in the AMS.
• If you don't need the filament clip, print two ‘left’ rings.
• See photos

Notes

• Print Material: I recommend PETG or PHA as they are more flexible and less prone to breakage.
• These spools are quite wide so I had to make the side walls a lot thinner to allow the spool to rotate smoothly. I tried this on the spools I have but there may be variability. Please let me know if you have issues.

Other Brands

• Anycubic 198mm
• Beyond Plastic 199mm
• California Filament 199mm
• Creator 198mm
• Duramic 199mm
• Elegoo Rapid 198mm
• Eryone 197mm
• eSun 199mm/200mm
• Overture 199mm
• Polymaker - 199mm
• Printed Solid - Jesse 200mm
• Regen PHA 197mm
• Sunlu Elite 194mm

-

Feedback letting me know how your print went would be greatly appreciated.

If you're feeling generous and like what you see, Buy Me a Coffee or just Send me a tip.