eSUN AMS Cardboard Spool Adapter 199mm/200mm

eSUN AMS Cardboard Spool Adapter 199mm/200mm

Boost
56
97
17

Print Profile(4)

All
P1S
P1P
X1
X1 Carbon
X1E
A1

199mm PETG 0.2mm layer, 6 walls, 25% infill
199mm PETG 0.2mm layer, 6 walls, 25% infill
Designer
56 min
2 plates
5.0(6)

199mm PLA 0.2mm layer, 6 walls, 25% infill
199mm PLA 0.2mm layer, 6 walls, 25% infill
Designer
52 min
2 plates
5.0(4)

200mm PETG 0.2mm layer, 6 walls, 25% infill
200mm PETG 0.2mm layer, 6 walls, 25% infill
Designer
56 min
2 plates
5.0(2)

200mm PLA 0.2mm layer, 6 walls, 25% infill
200mm PLA 0.2mm layer, 6 walls, 25% infill
Designer
53 min
2 plates
5.0(2)

Boost
56
97
17
4
115
97
Released

Description

Wraps the edges of ae eSUN 1kg cardboard spool with 199mm or 200mm diameter

Features

  • Improves contact and rotation in the AMS
  • Protective layer to prevent cardboard from deteriorating and cardboard dust damaging the AMS
  • Integrated filament clip
  • Name clearly visible to identify what spool it is for
  • Sturdy design - I found that many other designs were too thin and broke easily when removed.
  • Avoids blocking filament holes in the cardboard spool

Instructions

  • Measure your spool first to ensure the diameter matches the adapter (199mm or 200mm)
  • The ‘right' ring is wider and has the filament clip. It must be on the right side when the spool is in the AMS.
  • See photos

Notes

  • Print Material: I recommend PETG or PHA as they are more flexible and less prone to breakage.

Other Brands

Comment & Rating (17)

Please fill in your opinion
(0/5000)

Print Profile
199mm PETG 0.2mm layer, 6 walls, 25% infill
i really like the included clip to hold the Filament. The 199mm seems to be a bit of a lose fit on dried cardboard but i guess it will still work. Have to try it in AMS when it's finally delivered.
0
Reply
Print Profile
199mm PLA 0.2mm layer, 6 walls, 25% infill
perfect fit. filament clip is a nice addition over other models
0
Reply
适合储存,但用在ams内会被卡住无法转动(标签位置)。
The designer has replied
0
Reply
Did you follow the instructions and put the filament clip on the right hand side?
0
Reply
Replying to @anselor :
Thank you, I didn't notice this installation instructions. I'll try again
1
Reply
Print Profile
199mm PLA 0.2mm layer, 6 walls, 25% infill
The built-in clip works great! Thanks!!
1
Reply
Print Profile
200mm PLA 0.2mm layer, 6 walls, 25% infill
works as it should.
0
Reply
Print Profile
200mm PETG 0.2mm layer, 6 walls, 25% infill
1
Reply
Print Profile
200mm PLA 0.2mm layer, 6 walls, 25% infill
1
Reply
Print Profile
199mm PETG 0.2mm layer, 6 walls, 25% infill
1
Reply
Boosted
Print Profile
199mm PETG 0.2mm layer, 6 walls, 25% infill
1
Reply
Print Profile
199mm PETG 0.2mm layer, 6 walls, 25% infill
1
Reply