Another piece has been added to my small collection. I hope you will like this scraper too.

The scraper consists of two parts, of which I made two versions for you.

Part 1. Scraper handle for the original Bambu Lab 36x12x2 mm magnet

Other materials used: 36x12x2 mm self-adhesive magnet

Part 2. Scraper handle for D10x2 mm magnet

Other materials used: 3 pcs D10x2 mm magnet

Part 3. Scraper head for original Bambu Lab screws

Other materials used: 2 x original Bambu Lab screws

Part 4. Scraper head for 2 pcs M3 thread insert

Other materials used: 2 x M3 heat insert and 2 x M3x8 mm dome head bolt

These can be varied freely, both handles are compatible with both heads.

Its assembly is the same as the original scraper.
1. WITHOUT THE BLADE, screw in the screws almost all the way.

2. Stick the magnet in place
3. Insert the blade
4. Keeping the head in place, carefully tighten the screws

If you like this 3D model and are able to, please consider supporting my work by > buying me a coffee < your contribution will go a long way towards making future creations! Thank you for being a supporter!

Recommend:

I would like to recommend the following models to your attention (link, click on the photos):