Bambu Lab P1P Screen Faceplate Frame by morikostyles

morikostyles

3D Printer>3D Printer Parts

Print Profile(2)

All

P1S

P1P

X1 Carbon

X1E

Regular, snap fit, 0.2mm layer, 2 walls, 15% infill

48 min

1 plate

4.6(37)

0.2mm layer, 2 walls, 15% infill

38 min

1 plate

5.0(1)

Boost

222

169

Released

Description

Minimalist screen frame/faceplate/protector for the Bambu Lab P1P.
Remixed from the BU Faceplate by 3D Sourcerer

Jan 31, 2023 Update:

Added a second version that is compatible with the ARC enclosure. The original version, at least in my experience, was slightly interfering with the ARC enclosure's front door, so the second version resolves this issue.

p1p

printer

faceplate

Comment & Rating (43)

@jtkasprick

Print Profile

0.2mm layer, 2 walls, 15% infill

fit well looks good. no issues with print

@iiMT

Print Profile

Regular, snap fit, 0.2mm layer, 2 walls, 15% infill

only issue is I had to put a piece of filament poop in between the cover and the screen so that the screen can be removed after installing it. without that I don't know how you would trigger the push lock. I would recommend adding a bracer into the design but this solution has worked fine for me to remove the LCD multiple times in testing.

(Edited)