BAMBU LAB P1S TOOLKIT ORGANIZER BOX

Copyright Claim

BAMBU LAB P1S TOOLKIT ORGANIZER BOX

Boost
1928
5209
1097

Print Profile(10)

All
P1S
P1P
X1
X1 Carbon
X1E
A1
A1 mini

0.2mm layer, 2 walls, 15% infill
0.2mm layer, 2 walls, 15% infill
Designer
3 h
1 plate
4.8(540)

Logo through lid, 0.2mm layer, 2 walls, 15% infill
Logo through lid, 0.2mm layer, 2 walls, 15% infill
3.5 h
2 plates
4.8(194)

0.2mm layer, 2 walls, 15% infill, AMS Multi Color
0.2mm layer, 2 walls, 15% infill, AMS Multi Color
6.8 h
1 plate
4.8(177)

Longer hex key tray
Longer hex key tray
3 h
1 plate
4.9(43)
Click to see more

Open in Bambu Studio
Boost
1928
5209
1097
738
6.4 k
5.3 k
Released

Description

VERSION 2.0 IS NOW AVAILABLE HERE.

Improved based on community feedback, thanks to anyone who downloaded this model and suggested improvements.

Inserts are compatible between the V1 and the V2 so if you have the V1 you won't need to print those.

 

 

 

This simple box holds all of the tools that are included with the bambu lab p1s printer.

Lid can be used to hold the screws during maintenance.

Logo is printed separatly to be able to print in different colors without AMS, it will simply snap into place.

This is ment as a desk item.

 

I personally printed all the parts with 0.20 STANDARD profile.

 

Now added a top insert for longer hex keys

Comment & Rating (1097)

Please fill in your opinion
(0/5000)

the idea is very nice and would be perfect but I have encountered some problems the length of the seat for the Hex key does not fit, it is too small the cover is too loose and does not fit properly
The designer has replied
0
Reply
seems like you have a different length from every one else that printed it, if you give me the length of the hex key I can make a model that will fit, you’ll just need to print the top part
0
Reply
Replying to @BorgoTechSpace :
I have the same problem, my large hex key doesn't fit. I measured 131mm. Would it be a lot of work to send a modified (stp) file of the top plate?
0
Reply
Strange, i have the same problem but with the shorter one. It doesn't fit.
0
Reply
Came out beautifully. I merged the logo with the lid and extended it all the way through. Compact and holds all the extras perfectly.
The designer has replied
5
Reply
Really cool, this color combo gives me samurai vibes
2
Reply
May I inquire about the specific filaments used?
Show original
0
Reply
I am a novice... and I would appreciate it if you could explain the logo fusion to me.
Show original
0
Reply
This is fantastic, much nicer than keeping a cardboard box around! it turned out great with a minor issue with a fairly noticable z seam. I didn't notice any in other print photos so I'm not sure what happened, but I used the print profile from the handy app to start the print. Either way it's to hold tools so it's okay to have some character. Thank you for the awesome container 🙏
The designer has replied
2
Reply
That is the junction alignment, can be set to random to have it in different spots for each layer
1
Reply
Sorry I'm super new to 3d printing. Is that something that the other prints have done to avoid the line? I looked at the different options in the Bambu slicer and it seems reasonable but I guess it was just a surprise because I didn't see any like that in the ones that were posted here. 😅
0
Reply
Replying to @dstack4273 :
thats a very common technique actually. probably everyone did it.
1
Reply
Printed perfect, looks great, now if I could only find the model for the tiny scrappers I’d be away!
The designer has replied
0
Reply
Replying to @BorgoTechSpace :
Amazing! Thanks.
0
Reply
Replying to @BorgoTechSpace :
any idea what you scaled it down to?
0
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
very nice, thanks!
The designer has replied
3
Reply
Cleeean!
0
Reply
Print Profile
Logo through lid, 0.2mm layer, 2 walls, 15% infill
very nice model, thanks! fits x1c tools as well!
2
Reply
Was looking for a comment like this one, thank you so much for the notice!!
0
Reply
it was perfect.. I loved how nice and pretty came from the printer ( still need to print the logo in another color )
The designer has replied
0
Reply
Man I'm loving this white, is it pla basic?
1
Reply
Replying to @BorgoTechSpace :
yes , it’s Sunlu Pla Meta white
0
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
Great design
1
Reply
Great disign
0
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
Printed nicely with good quality
The designer has replied
1
Reply
Beautiful!
0
Reply
Boosted
Print Profile
0.2mm layer, 2 walls, 15% infill
I used my AMS and made it multi color.
The designer has replied
1
Reply
Thanks so much for the boost, love the color scheme on that!
0
Reply

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.