Bambu A1 Screen Cover by Rox3D

Rox3D

3D Printer>3D Printer Parts

Print Profile(5)

All

P1S

P1P

X1 Carbon

X1E

A1 mini

0.16mm layer, 2 walls, 15% infill

Designer

1.2 h

1 plate

5.0(21)

0.16mm layer, 2 walls, 15% infill (PETG)

1.2 h

1 plate

5.0(1)

[Other Printers]: 0.16mm layer, 2 walls, 15% infill

1.2 h

1 plate

0.18mm layer, 2 walls, 15% infill

1.1 h

1 plate

Click to see more

Boost

263

428

457

326

Released

Description

It is important to consider that there is a special edge that prevents the cover from touching the screen:

There are four small clips to prevent the screen from moving while it is opened:

There is a snap clip that holds the lid closed.

The lid stays open on its own.

For the hinge pin you can use the pin included in the print or a 3.15 mm diameter metal nail

The supports are only needed for the hinge of the fixed part of the cover

bambu a1 screen cover

open close screen protector

a1 accessories

a1 screen saver

screen saver

bambu lab a1 screen cover

Comment & Rating (63)

@user_1335963764

Boosted

Very good！！

The designer has replied

@Rox3D

Wow very nice color and texture, thanks for sharing!

@user_1335963764

Boosted

@trix

Print Profile

0.16mm layer, 2 walls, 15% infill

good print. Lid closes a bit to hard. when ik want to open it, both pieces come loose from the screen.

(Edited)

The designer has replied

@Rox3D

Thank you. Nice color! It's really strange that the cover moves from the screen. I tested it a lot of times.

@trix

Replying to @Rox3D :

yeah, its the little tab that clicks in the frame. It comes out when I push the middle of the lid and curl it up. I took the tab away so it's not closing that hard.

(Edited)

@benjamin.mamero

Been there, done that :D Thx for sharing - pretty snappy fit, lid closes tight, but a bit of double-sided tape helped here, so that the frame won't come loose any longer when opening.

The designer has replied

@Rox3D

Grate color :-) Thanks for sharing your experience.

@loiseaucreatif

Boosted

Print Profile

0.16mm layer, 2 walls, 15% infill

An essential little accessory that fits perfectly into the A1

The designer has replied

@Rox3D

Thank You :-)

@user_3401786825

Boosted

perfect 👌

The designer has replied

@Rox3D

Thank you :-)

@T4M1R

Print Profile

0.16mm layer, 2 walls, 15% infill

super

The designer has replied

@Rox3D

Thank You

@TeMoney

amazing! fits great

The designer has replied

@Rox3D

Thank you :-)

@hoille_pau

Boosted

Print Profile

0.16mm layer, 2 walls, 15% infill

juste au top

The designer has replied

@Rox3D

Thank you :-)

@AdilettenLarry

Print Profile

0.16mm layer, 2 walls, 15% infill

Very good! :)

@user_3189058199

Print Profile

0.16mm layer, 2 walls, 15% infill

Great print

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.

Related Models

Print Profile(5)

Description

Comment & Rating (63)

License

Related Models

Birthday Crown

AMS lite Feeder Units Cover / CAPS / Customisible

Screen Bezel with Allen keys holder V3 for P1P/P1S

Gameboy Advance SP A1 Mini Screen Cover