Modular clamp workshop system (clamp, vise & more)

Hello everyone,

Update 17.03.2026: Added new modules that utilize M6x40 screws and nut for tightening.

Update 11.04.2025: Added static clamp without side movement

Update 07.04.2025: added movable modules in version 2 that can withstand much greater force, added adjustable double-sided extension

Update 30.03.2025: added desk stand and adjustable extensions

There are plenty of projects for vices, handles, etc., but I haven't found any system that could be adapted to your needs.

That's why I came up with the idea to make something like this!

I present to you a modular system that can be adapted to your workshop needs.

Depending on what you need, you can print the necessary parts and connect everything together.

First, I present a table handle that is the base for the rest of the modules.

I created a lot of different configurations:

1. clamp with necessary parts
2. Static system
3. possibility of horizontal rotation + locking in a selected angle
4. possibility of horizontal and vertical rotation - with locks
5. possibility of horizontal and vertical rotation and rotation of the connected end - with locks

i suggest to print all the screws in 100% infill
rest with minimum 35% infill but higher is better.

The ends are fastened with clips to lock them and prevent the modules from unfastening.

check out attachments:
VISE: https://makerworld.com/en/models/1258227
Dremel 3000: https://makerworld.com/en/models/1259144

symmetrical clamp with arm: https://makerworld.com/en/models/1298890

Pattern makers vise with 360 jaws movement: https://makerworld.com/en/models/1309164

4-Way modular vise: https://makerworld.com/en/models/1613408

Stiching Pony: https://makerworld.com/pl/models/2491001

more modules on the way!

 

If you want to support my work:

If you want to sell my models:

Thank you so much for all your support!