This is a simple to use filament respooler that is easy to print and works perfectly with the Snapmaker U1! The Snapmaker U1 spool holders are used for the donor and receiving filament spools!

This is a set of replacement covers for the WiFi Antennas (both 2.4 GHz and 5 GHz) for the Engenius ENS620EXT WiFi access point. I was surprised to learn that Engenius does not sell these antennas as replacement items! They report that the ENS620EXT is an old out of production unit! No direct replacements found on Amazon or Ebay! My antennas were broken during a winter storm. After looking at them, I saw that it was only the plastic covers that were broken. 3D Printing to the rescue!

I had a hole in a shelf where some wires came through a hole. The wires were removed, and I wanted to cover the hole, so I drew this simple hole cover in TinkerCad and printed it.

Never damage or bung a button cell battery door again! You know, those CR2032 or similar battery doors that require a small tool, coin or other object to twist open? Using a metal object can often damage the plastic door. Let's fight plastic with plastic! Try this tool first, if it doesn't work for some reason because the door is too tight, then you can go for your pocket and dig out a coin to try. Oh wait, most people pay with their phones and no longer carry coins! Use this tool!

Would you like to have your Bambu Scraper attached to your X1C? This works well and is an easy print. It can hold onto the aluminum case of the X1C (or P1S), and even some small metal tool chests! This version fixes the magnet on the wrong side of the holder and also adds a lip to catch onto the aluminum sides of the printer panels. It should also work with many LED risers.

Everyone wants this cute, tiny, no support needed, quick to print Infinity Cube!

Here's a TOP accessible ON/OFF power switch for your X1C or P1S printer. It helps so you don't have to reach behind the printer. Which is good if your printer located against a wall. or has the AMS or something else beside it, or it's located in a cabinet.

This is an updated Version 2 "Improved" version of my popular 4-in-1 PTFE Adapter Mount. This is very useful and IMHO, Bambu should include the 4-in-1 PTFE Adapter with every system that comes with an AMS! It's so much easier so there is NO more filament all over the floor when you forget to re-connect the PTFE tube from the AMS! (yes, I've done it several times LOL) My mount helps to reduce friction in the filament path, thereby reducing the chance of filament feed or retraction errors.

I found that many of the popular cereal storage boxes that we buy to store and protect our filament from humidity actually 'breathe' and will let in humidity over time (see my print for details of what this means). So I designed this easy clip to help reduce the amount of humidity entering the storage boxes. It's easy and simple! Yes, there are other solutions, or different storage boxes, but this helps with many.

I was tired of my Bambu Scraper grip holder not being able to be attached using the magnet. So I remixed the original to fix the problem, yet still use all the original Bambu scraper parts. It's much nicer now, that I can use the base holder with the magnet. Give it a try! Note: You can remove the magnet supplied by Bambu from the original holder and move it to the new one. Even after year, it moved easily for me.

A simple divider to allow Allen keys to be stored along with the contents of the box

Are you tired of reaching behind your X1C or P1S printer to operate the power switch? Then this model is for you! Beta Testers wanted: This is currently in 'beta test', I'd appreciate if you could try this and let me know if it works for you! If there are any problems, please work with me instead of giving it a low rating! https://makerworld.com/en/models/831275#profileId-775713

I had a broken choke lever on my older garden line trimmer. AKA Weed Wacker. So I whipped one up and printed it. It seems to fit and work nicely! This is for any small engine that uses a similar choke lever. Mine happened to be an older Craftsman brand.

This is a redesign of the Bimini Boat Clip. It's been totally redesigned to fit 1 inch (25.4 mm) diameter Bimini poles.

I just put together this quick test print to check the operation of the new Bambu Cool Plate SuperTack. It's easy and quick. Tests both PETG HF and PLA Basic. No poop!

This print allows you to use your cool Altoid tins for storage! I updated this version of PillToid to remove floating unloading ramps. This