Overview

A-10 kit card

Check out the SR-71, B-52, A-10, 787, and Darkstar!

Check out the full airplane kit card collection → linked here!

Profiles

• Kit Card
  • plane in a kit card format ideal for gifting to others
• Model Pieces
  • plane without a kit ideal for assembly right off the printer

Filament

As shown:

• Inland PLA Light Brown
• Hatchbox PLA Cool Gray
• Overture PLA Cement Gray
• Overture PLA Space Gray

Tips

• Model requires close tolerances to ensure snug but not tight or loose fit
  • Make sure the model cools to room temperature before assembly
  • Ensure filament is properly calibrated with no excessive over extrusion

Assembly

• Remove all pieces from the kit
• Debur as needed to smooth edges
• Glue missile together (optional but recommended)
• Let glue cure before proceeding to next step (optional but recommended)
• Insert wing into forward fuselage slot
• Insert engine pylon into middle fuselage slot
• Insert horizontal tail into aft fuselage slot
• Insert engine to pylon
  • Recommend forward end first, then press down on the aft end. It will clip into place. (See gift below)
• Insert missile pylon to wing
  • Recommend aft end first, then press down softly on forward end. It will clip into place. (See gift below)
• Insert vertical tail onto horizontal tail
  • Recommend aft end first, then press down on the forward end. It will clip into place. (See gift below)
• Place airplane onto stand
  • Recommend slot into the forward end first so that the tabs at the aft end do not accidently break
• Enjoy!