Hygrometerholder Bambu Lab P1S and P1P by Tom.john98

Tom.john98

3D Printer>3D Printer Accessories

Print Profile(1)

All

P1P

P1S

X1 Carbon

X1E

0.2mm layer, 2 walls, 15% infill

Designer

43 min

1 plate

4.7(46)

Boost

160

254

182

Released

Description

!!Only usable for P1P and P1S the lidar will collide with it.!!

I present to you the easiest, yet cleverest way to check the temperatur and the humidity in you printing chamber. It is easy to print and has a strong grip on the printerframe thanks to a nose that clicks into the 5mm holes on the frame. It can be mounted in the front or the back on the right side of the printer.

As you can see in the pictures you can also see the temperature from the camera of your printer.

Make sure that it snaped into one of the holes in the frame else the clearence for the x-axis carage is not given and make sure to use PETG or ABS to have a temperature resisting material because the chamber temperature can get above 50 °C

This hygrometers can be used:

https://www.amazon.de/ARCELI-Digitales-Thermometer-Hygrometer-Gewächshaus/dp/B0BNM8CBZY?pd_rd_w=HS3AU&content-id=amzn1.sym.7a95104d-fb24-4722-8151-dd0802fa5b4f&pf_rd_p=7a95104d-fb24-4722-8151-dd0802fa5b4f&pf_rd_r=NAH4MT8J38EKHDFYK9M1&pd_rd_wg=XGxT9&pd_rd_r=8a3b07ea-e794-4b22-b645-08a7496c01f5&pd_rd_i=B0BNM8CBZY&psc=1&ref_=pd_bap_d_grid_rp_0_1_i

Comment & Rating (54)

@totenkopf85

Print Profile

0.2mm layer, 2 walls, 15% infill

Works well, visible on camera when printing.

@lilrepete

Print Profile

0.2mm layer, 2 walls, 15% infill

Thanks for designing, PERFECT PRINT!

@save11

Print Profile

0.2mm layer, 2 walls, 15% infill

Absolutely love this! The print profile for PETG is perfect. I can see it in the Bambu studio camera view. I had one mounted to the door handle before and it was hard to read because I keep the room dark and I had to walk over to the printer to see it.