Updated: I have added in the option for rear spool and also added in the option for the rear spool and double plate. I have not tested the last 6 plates but I duplicated what was currently created.
I found two risers I really liked but I missed something from both. So, I took then and combined then into one. Within the 3mf file you will find all the connecting pieces and part to build the entire riser (for the connecting parts you will see some bowtie shaped and the thinnest 2 are used between main riser pieces 1 and 2 on the underside. The two models I used are in the links below.
For the power to the LED I used the 24v to 5v converter, see below. I also added a USB switch
The LED I used is linked below (6000k cool white USB5v-connector-4.92ft/1.5m).
The USB swich is linked below.
I have saved my print setting but might not work for everyone so use those with caution.
BLV - AMS Riser for X1C v1.3 by benlevi - MakerWorld