WOW 🤩👍

Hi Billy, It's just a Vinyl wrap. I ordered a sheet of amazon and cut it to size. Its really easy to do and you don't need to take the machine apart.

Where can I find the side panels like in your pics? Thanks :)

TOP thank you 👍

Very nice. How did you make this adjustment?

how can i buy you a beer

atm i have some trouble. i forgot the TPU in the 2 Front Dash Parts and i need to check if it works without Changes on P1&2 befor i can release this two Parts.

Genau das wollte ich auch noch fragen ist mir gerade aufgelfallen da der Linke vordere gerade fertig gedruckt ist.

Jo die Nut in die das TPU Part vorne kommt ist ja in Part 5&6 drin. Das habe ich mit dem Trouble Post gemeint. 5&6 kannste also drucken. Was aber noch fehlt ist das TPU Part selbst. Bin noch nicht dazu gekommen das zu designen und ich habe noch kein TPU weshalb ich keinen Testdruck machen kann. Werde die so schnell es geht designen. Wenn du als Testdrucker herhalten möchtest kann ich dir die STL gerne vorab geben aber releasen kann ich die nicht bevor die getestet sind.

I think a second solution where u can use the USB Port on the front could be an option. I'll investigate on that. Is there a switch for this usb port? But what do mean with "20mm shorter"?

There is no switch for it but one could build a switch to use the little hole cut on the top of the p1s. When I say 20mm shorter I mean the overall height, it just looks as you could make it shorter. Would decrease the height between the glass top and the bottom of the riser where the build plates go? I haven't printed on out yet because I was looking for the full led strip and then power leads to the front inside and I found your remix with the full led strip and got all excited! So since I haven't printed on yet I don't know if you could lower it by 20mm with out affecting the removal of the glass top and such?

I'm working on a a remix for a switch to go in place of the front hole cut out on the P1 series. I will post the remix once I verify fitment and it uses latching switch from amazon so people can source it and the usb led strip.

What is it on the picture and what do you mean with "LED Panel Light lying on glass"???

can you please send a picture of the whole Riser?

Thanks for following up. I have tried to add some detailed photos, I hope they help. There is a temperature and humidity monitor right on top of the LED panel light (something like this http://surl.li/rfbzt) It sits around 35c. I did not think that would be sufficient to cause the issues, but I guess this is how one learns.

什么时候分享？

is already done and released! 😊👍

666

Hi thank you hmm my back sides aren't perfect either but not that bad. Variable layer height for this region could be a part of the solution 🤔

I'm having the same problem. Not sure what to do honestly. I attempted changing to the default .2 profile and got the same results. These were my first 4 attempts I stopped early when I noticed issues. The 5th print was pretty much the same.

@maCyo42, Thank you for the reply. Never used Variable layer high before so watched a video yesterday and made the amendments. Currently printing now so shall see how it goes. Cheers.

Moin 😁 passen tut das ganze ja eh beim x1c. Auf das Front Dash Links x1c schreiben wäre kein Thema. die Knöpfe rechts wären eher ein Thema. ich gucke ma was ich machen kann

Mooin, ja das meinte ich, die Nut für die Knöpfe auf der rechten und die Schräge für das Display auf der linken Seite. Ansonsten kann ich mich auch mal daran versuchen, wenn du die beiden Teile fertig hast :)

Achso und ja die beiden Teile vorne haben auch die Nut für den LED Streifen :-)

Whats filament is this?

Bambu Basic Silver and Green

PLA?

you can easily remove or edit the name plate in the slicer

Very True the problem is I keep using MakerWorld as of ease my bad still love the improvements you did well done and thanks

I agree with you. There's just this little problem about that. Maybe I'm taking this too seriously 😊