Mandala Organizer Box
Mandala Organizer Box
Boost
122
224
25
Print Profile(3)
![[70% Scale for a1 mini] 0.2mm layer, 2 walls, 10% infill](https://makerworld.bblmw.com/makerworld/model/USce27c5b0bb6e20/design/2023-12-01_6b117ed309dce.jpg?x-oss-process=image/resize,w_100/format,webp)
[70% Scale for a1 mini] 0.2mm layer, 2 walls, 10% infill
2.9 h
2 plates
Silk-PLA | HQ-SLOW | Fuzzy-Skin | 0.24mm layer, 2 walls, 15% infill
6.9 h
2 plates
A1, 15% infill w/ Additional plate for lid knob
3.2 h
3 plates
Open in Bambu Studio
Boost
122
224
25
6
361
340
Released
Description
This is a mandala organizer. It has never been so easy to be in order. It's something everyone can enjoy!
The height is 2.5 cm, the width is 20 cm and the thickness is 0.2 cm. Before printing, see the printing instructions.
Printing instructions
Print orientation should be placed sideways on the bottom surface. It is intended for printing without supports. We print with layer 0.3 and nozzle 0.4 and with 10% filling and 2 perimeters.
Comment & Rating (25)
All
Print Profile
Silk-PLA | HQ-SLOW | Fuzzy-Skin | 0.24mm layer, 2 walls, 15% infill
very nice and pretty i did with a green sparke inside
The designer has replied
0
Reply
very nice print!
0
Reply
Print Profile
[70% Scale for a1 mini] 0.2mm layer, 2 walls, 10% infill
Great print very happy with the end result.
0
Reply
Print Profile
[70% Scale for a1 mini] 0.2mm layer, 2 walls, 10% infill
Great print, I reprinted the base container as I didn't set the seam positiion to "back". Turned out perfect thanks!
0
Reply
Print Profile
[70% Scale for a1 mini] 0.2mm layer, 2 walls, 10% infill
Very pretty perfect print.
0
Reply
Print Profile
[70% Scale for a1 mini] 0.2mm layer, 2 walls, 10% infill
Beautiful detail! I can’t wait to do it in a few more colors. Thank you for sharing!
0
Reply
Such a pretty tray!
0
Reply
Print Profile
Silk-PLA | HQ-SLOW | Fuzzy-Skin | 0.24mm layer, 2 walls, 15% infill
printed well and looks good. Infeelmitnwould be better if the lid sat in the groove around the base rather than sitting on the top of the base
(Edited)The designer has replied
0
Reply
I agree, but remember that this is the rating for the print profile, not the model itself.
0
Reply
Print Profile
[70% Scale for a1 mini] 0.2mm layer, 2 walls, 10% infill
Nice
(Edited)0
Reply
Print Profile
[70% Scale for a1 mini] 0.2mm layer, 2 walls, 10% infill
it printed perfect 😁
0
Reply
Print Profile
[70% Scale for a1 mini] 0.2mm layer, 2 walls, 10% infill
Perfect print
x1c,pei plate, bambu basic PLA
Thank you !
0
Reply
License
This user content is licensed under a
Creative Commons Attribution-Noncommercial-NoDerivativesRelated Models
© 2024 MakerWorld