A1 Z-Axis Drag Chain (Cable Chain) - V2 - Free 3D Print Model

Search models, users, collections, and posts

Arzhang Lotfi

3D Printer>3D Printer Parts

IP Report

Print Profile(4)

All

P1S

P1P

X1 Carbon

X1E

H2D

H2D Pro

H2S

P2S

H2C

X2D

A2L

A1 mini

0.2mm layer, 2 walls, 15% infill

Designer

4.2 h

2 plates

4.8(1.6 k)

Rotation and Support 0.2mm layer, 2 walls, 15% infill

4.2 h

2 plates

4.7(100)

new version for 2026 A1 models (READ DESCRIPTION!!!)

4.3 h

2 plates

4.5(40)

0.2mm layer, 2 walls, 15% infill

1.2 h

1 plate

4.6(7)

Open in Bambu Studio

Boost

9544

23666

3673

2.2 k

21.6 k

13.3 k

Released

Bill of Materials

Maker's Supply Kits and Parts

Select all

BT3x12 SHCS Self Tapping Screw (20PCS) - AA109

BT3 Socket Head Cap Self Tapping Screws (SHCS)

Bambu Filaments

Select all

PLA Basic

Description

✨ Enjoy my designs? Please boost, like, and follow! Your support makes a big difference! ✨

If you'd like to go further, you can buy me a coffee here: ☕ buymeacoffee.com/arzhanglotfi.

Thank you!

Boost Me (for free)

It's free fo you, and that's the only way I get reward for my work.

X-Axis Drag Chain (hotend) - https://makerworld.com/en/models/766893

Y-Axis Drag Chain (heat bed) - https://makerworld.com/en/models/707408

Z-Axis Drag Chain (side) - https://makerworld.com/en/models/707695

A1 Z-Axis Drag Chain - V2

Please read carefully!

For the main part that connects on the x motor house, there is a version with a extruder cable chain connector and one without it.

ASSEMBLY:

Bring the extruder to the lowest Z height.
Click the side box into the grooves. You can use some double sided tape betweeen the box and the printer too.
Close the back of the side box with the extra hinge part.
Bring the extruder to max Z height.
Add the main part to the motor house. Slide it from the right then add scews. 4 pieces of M3 (min 5 max 12mm) You can srew on the bottom part first if its easyer for you. Also here you can add the first link since its easyer to snap before tightening the screw fully.
IMPORTANT: Start assembling the links from the TOP while straithening the cable until you reach the bottom. The links direction must be alternating to hold the cable and to have a good curvature at the end. Use all (min 13) links but if you need more lenght you can just print individual links.
Test if the bending of cable is good.
ENJOY!

I Printed this with Bambu Lab - PLA Basic - Light Grey (Same color as printer main body)

✨ Enjoy my designs? Please boost, like, and follow! Your support makes a big difference! ✨

If you'd like to go further, you can buy me a coffee here: ☕ buymeacoffee.com/arzhanglotfi.

Thank you!

Boost Me (for free)

It's free fo you, and that's the only way I get reward for my work.

Comment & Rating (3673)

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.