Ultimate PaperMario Fan Art Pack! +50 Characters

New PaperMario Ultimate Fan Art Pack Over 50 Characters! Now for free at Makerworld!

All Characters Are Fully scalable if you want to choose the image size yourself.

Choose your own image and scale the image according to your taste, just remember that the Z value must be the same as in the original!

Where to use these? 
it's up to you! 
Few exsamples:
1. if you want make keychain just add on hole on bambustudio at picture its up to you!
2. add fridge add magnet/magnets at back image

3. cool gifts for friends

4. use your imagination 

Only 4 colors? (Optimal my settings)
Yes but also you can make own customs not recommend change black or white
1 - black
2 - dark colors

3 - light colors

4 - white

Setup & Making these?

So how to make these? Download .3MF File and feel free to print!
If you use X1C you can use my settings also its up to you too!

I recommend the first ones with basic settings, but I use small changes

Setup:
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 2.2mm

Filaments Used:
PLA BambuLab Basic Black Transmission Distance: 0.6
PLA BambuLab Basic Blue Gray Transmission Distance: 3
PLA BambuLab Basic Gray Transmission Distance: 2
PLA BambuLab Basic Jade White Transmission Distance: 5
This print uses 4 unique filaments

Swap Instructions:
Start with Black
At layer #8 (0.72mm) swap to Blue Gray
At layer #12 (1.04mm) swap to Gray
At layer #18 (1.52mm) swap to Jade White for the rest.