Ultimate Final PaperMario Pack#2 | +135 Printables

Ultimate PaperMario Pack#2 and Final!

AAaaaaa….aannnnD +135 Characters! yay!!
Now only and free at Makerworld! Get yours today!!

All Characters Are Fully scalable if you want to choose the image size yourself. (make sure you make own plate when customizing these)

Choose your own image and scale the image according to your taste, just remember that the Z value must be the same as in the original! then your fine!

This is Huge Collection of Characters! First pack was test people like it! so i make EVEN! BIGGER! And added also Missing characters now if you downloaded Pack #1 and not Pack#2 Final then you own all characters ;)

Where to use these? 
it's up to you! 
Few exsamples:
1. Wall Art just tape behind or maybe use stands?
2. add fridge add magnet/magnets at back image

3. cool gifts for friends

4. use your imagination

Only 4 colors? (Optimal my settings)
I like oldschool like black and white but wanted add little own spice!
Yes but also you can make own customs not recommend change black or white
1 - black (not recommend change)
2 - dark colors (You can change this any dark)

3 - light colors (You can change this any Light colors)

4 - white (never tried glow in dark in this but maybe good idea test ;)) recommend to be white

Also There is 13 Plate of Fun! 
You can pick your favorites own plate and print that one out also!

Here is some Setup

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 2.2mm

Filaments Used:
PLA BambuLab Basic Black Transmission Distance: 0.6
PLA BambuLab Basic Blue Gray Transmission Distance: 3
PLA BambuLab Basic Gray Transmission Distance: 2
PLA BambuLab Basic Jade White Transmission Distance: 5
This print uses 4 unique filaments

Swap Instructions:
Start with Black
At layer #8 (0.72mm) swap to Blue Gray
At layer #12 (1.04mm) swap to Gray
At layer #18 (1.52mm) swap to Jade White for the rest.

Thankyou for your time!