A1/A1 Mini fan cover by 3D design

3D design

3D Printer>3D Printer Parts

IP Report

Print Profile(9)

All

A1 mini

P1S

P1P

X1 Carbon

X1E

H2D

0.12mm layer, 4 walls, 15% infill

Designer

12 min

1 plate

4.9(3.9 k)

0.2mm layer, 2 walls, 0% infill

Designer

11 min

1 plate

4.9(129)

0.2mm layer, 2 walls, 15% infill

8 min

1 plate

4.9(289)

0.12mm layer, 4 walls, 15% infill

12 min

1 plate

4.8(59)

Click to see more

Open in Bambu Studio

Boost

3432

8326

4889

1.8 k

25.8 k

18.7 k

Released

Description

I saw someone who made a fan cover for the x1c.. then I thought too but an A1/A1 Mini, of course also had to have one.

fan cover

Comment & Rating (4889)

@3DMetalCave

Print Profile

0.16mm layer, 4 walls, 0% infill

super gut geworden

(Edited)

@tripex80

not so good. cooling with this thing poorer than without this

@clawf1ng3r

dude that eye 😂

@3DMetalCave

Replying to @clawf1ng3r :

😂😂

@Tymotion

Print Profile

0.2mm layer, 2 walls, 0% infill

Fits perfectly. kept touching my finger on the fan so nice to have.

@Reagull

Thats exactly why i printed this lmao

@IGrayFox

Boosted

Print Profile

0.2mm layer, 2 walls, 15% infill

Minimalistic design. Fits perfectly on the A1. No further scaling applied.

@user_4255025353

Print Profile

0.16mm layer, 4 walls, 0% infill

Nice, easy and fast print! Sadly the lid was too tight for my taste, so in order to get it into the socket, I had to cut a little bit off the inner rim.

@Reagull

Print Profile

0.12mm layer, 4 walls, 15% infill

I print alot of faceplates for my A1 and everytime i would take one off i would touch the fan, problem solved! Easy Breezy Beautiful Covergirl

@rc1950

Beautiful cover print you have there.

@BicioIT

Print Profile

0.16mm layer, 4 walls, 0% infill

Un po grasso il modello, io ho dovuto limarlo un po per poterlo inserire nel suo alloggiamento

@DanishFish

Print Profile

0.12mm layer, 4 walls, 15% infill

Not sure its necessary, but it fits tight and looks right! No one will know if it came stock or not, its that seamless.

@the3dprintguy99

Print Profile

0.12mm layer, 4 walls, 15% infill

Positive: It fits great! Negative: Beware of stringing!

Other Issues:Stringing

@1Leakyy

it's because of your printer. try calibrating it

@the3dprintguy99

Replying to @1Leakyy :

I calibrated flow rate before this print. The stringing was probably due to the translucent PETG I was using.

@Stephanaccessor

Print Profile

0.12mm layer, 4 walls, 15% infill

perfect fit

@johnnyevans

Print Profile

0.16mm layer, 4 walls, 0% infill

fits perfect on A1 Mini

(Edited)

License

This user content is licensed under a

Creative Commons Attribution-Noncommercial-NoDerivatives

Get Commercial License

Related Models

A1 & A1 Mini - Rectangular Fan Cover

Arzhang Lotfi

852

2 k

6.9 k

Compact poop bucket S (A1, A1 mini)

Michal

10.3 k

9 k

70.1 k

A1 mini side drag chain (updated)

Kar Fai

1.4 k

3.6 k

12.3 k

A1/A1 mini Cable elastic conduit

ShapeX

3.6 k

5.6 k

41.4 k