Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:
PLA BambuLab Basic Black Transmission Distance: 0.6
PETG JAYO Gray Transmission Distance: 2.5
PLA BambuLab Basic Silver Transmission Distance: 0.5
PLA BambuLab Basic Jade White Transmission Distance: 5

!!!! It appears you have mixed filament types. Be certain this is what you want. !!!!!

Swap Instructions:
Start with Black
At layer #7 (0.64mm) swap to Gray
At layer #12 (1.04mm) swap to Silver
At layer #18 (1.52mm) swap to Jade White for the rest.