Terminator Movie Color Hueforge Filament Painting

Para imprimir este modelo NO necesitas AMS.

ATENCION :

Si dispones de AMS imprima directamente el perfil, si no tiene AMS debe agregar una pausa en cada cambio de color.

El modelo esta configurado para una impresion optima, si desea escalarlo puede hacerlo respetando el eje Z (grosor)

Filamentos utilizados:

1 - PLA Negro Smart Material Reclycled

2 - PLA Rojo Smart Material Reclycled

3 - PLA Gris oscuro Smart Material Reclycled

4 - PLA Blanco Frio Smart Material Reclycled

Instrucciones de Filamento:
Comienza con Negro
En la capa #7 (0.64mm) swap to Gris oscuro
En la capa #8 (0.72mm) swap to Blanco Frio
En la capa #15 (1.28mm) swap to Negro
En la capa #16 (1.36mm) swap to Rojo
En la capa #26 (2.16mm) swap to Gris oscuro
En la capa #27 (2.24mm) swap to Blanco Frio hasta el final.


ENGLISH

To print this model you DO NOT need AMS.

ATTENTION :

If you have AMS, print the profile directly. If you do not have AMS, you must add a pause for each color change.

The model is configured for optimal printing, if you want to scale it you can do so respecting the Z axis (thickness)

Filaments used:

1 - PLA Black Smart Material Recycled

2 - PLA Red Smart Material Recycled

3 - PLA Dark Gray Smart Material Reclycled

4 - PLA Cold White Smart Material Reclycled

Filament Instructions:
Start with Black
On layer #7 (0.64mm) swap to Dark Gray
On layer #8 (0.72mm) swap to Cool White
On layer #15 (1.28mm) swap to Black
On layer #16 (1.36mm) swap to Red
On layer #26 (2.16mm) swap to Dark Gray
On layer #27 (2.24mm) swap to Cold White until the end.