Gandalf of Movie Lord of the Rings Color Hueforge Filament Painting

Para imprimir este modelo NO necesitas AMS.

ATENCION :

Si dispones de AMS imprima directamente el perfil, si no tiene AMS debe agregar una pausa en cada cambio de color.

El modelo esta configurado para una impresion optima.

Filamentos utilizados:

1 - PLA Negro Smart Material Reclycled

2 - PLA Rojo Smart Material Reclycled

3 - PLA Amarillo Smart Material Reclycled

4 - PLA Blanco Frio Smart Material Reclycled

Instrucciones de Filamento:
Comienza con Negro
En la capa #7 (0.64mm) swap to Blanco Frio
En la capa #19 (1.6mm) swap to Negro
En la capa #24 (2mm) swap to Rojo
En la capa #28 (2.32mm) swap to Amarillo
En la capa #35 (2.88mm) swap to Blanco Frio hasta el final.


ENGLISH

Gandalf of Movie Lord of the Rings Color Hueforge Filament Painting

To print this model you DO NOT need AMS.

ATTENTION :

If you have AMS, print the profile directly. If you do not have AMS, you must add a pause for each color change.

The model is configured for optimal printing.

Filaments used:

1 - PLA Black Smart Material Recycled

2 - PLA Red Smart Material Recycled

3 - PLA Yellow Smart Material Recycled

4 - PLA Cold White Smart Material Reclycled

Filament Instructions:
Start with Black
On layer #7 (0.64mm) swap to Cold White
On layer #19 (1.6mm) swap to Black
On layer #24 (2mm) swap to Red
On layer #28 (2.32mm) swap to Yellow
On layer #35 (2.88mm) swap to Cold White until the end.