AMS Riser Remix (12mm Lightstrip) by maCyo42 Remixed by maCyo42

Remixed by

maCyo42

3D Printer>3D Printer Accessories

Print Profile(5)

All

P1S

P1P

X1 Carbon

X1E

Part 1&2 @0.12mm layer, 2 walls, 15% infill

Designer

29.4 h

2 plates

4.9(85)

Part 3&4 @0.12mm layer, 2 walls, 15% infill

Designer

41.1 h

2 plates

4.8(72)

Part 5&6 Front Dash @0.12mm layer, 2 walls, 15% infill

Designer

6.1 h

2 plates

4.9(27)

Part 5 & 6 - Cable cutout - 0.12mm layer, 2 walls, 15% infill

6.3 h

2 plates

5.0(5)

Click to see more

Open in Bambu Studio

Boost

343

613

274

2.9 k

2 k

Released

Description

NEW AMS Riser V2 is released

Oftentimes requested! Now released!
The 12mm Edition of my AMS Riser Remix.

Part1-6 are modified for 12mm Lightstrip Support. For a better fixing of the Lightstrip you can add 6 cable ties. 1 in each Corner and 2 at the back near the paththrough for the USB Cable.

This Project includes only the modified Parts as listed below:

Part 1
Part 2
Part 3
Part 4
Part 5 - Front Dash Left
Part 6 - Front Dash Right

The other Parts you can find below in the Showcase
Info X1C Users: Update Released X1C Part 5&6 https://makerworld.com/de/models/59156#profileId-61201

I havent remixed the Drawer. You can choose the Drawer from the Original or from a Drawer Remix outhere on Makerworld!

Happy printing

Comment & Rating (274)

@Elekktrik

came out great.

@StefanE.

Is this 12mm? Can you make a picture from the corner?

@SteveK

What light strip did you use? Looks great.

@jkanetis

I'd also like to know what light strip this is. I'm not seeing a link for it. Already printed this and have it on my machine and the PTFE tube keeps popping in and out of the strip slot and the sound is driving me crazy! lol

@stone4ever513

Hi thanks for ur Design. Can u change this on this Print too. Because its too thin.

The designer has replied

@maCyo42

Moose has uploaded his Profile you can use it or is there another Problem?

@maCyo42

aah damn you mean for the 12mm Version 🙈 sry I have not enough time at the moment but you can color it like you want in Bambu Studio.

@stone4ever513

Replying to @maCyo42 :

Yeah, for the 12mm Version with the LED Lights. I already tried it. It is very hard to get the same hight on the left and right frontpart.

@cutterbond

I bought the creator 2 beers for this one. Amazing job!

@meCoreyG

that hand is creeping me out lol... Cool idea

@cutterbond

Replying to @meCoreyG :

My girlfriend didn't like it either lol, so now it's a cat toy.

@3DEndeavors

Works great. Very sturdy feeling where it counts and takes the weight of the AMS off the glass top. Light path was clear and easy to run the lights along and ziptie mount locations are thoughtfully spaced. Reran a calibration on everything from top to bottom and had zero issue with lidar and max lighting. Thanks for the work! edit: make sure you print out of petg or something heat resistant if you print CF! mine melted lol

(Edited)

@BergvikiT

Hi, how did it melt? so bad you need a new? or just a bit saggy? and how high temps do you get when in the printer when printing CF? just need to know if I need to find a way to shield it or take the riser off when I print ABS, ASA or CF myself. Just done with the print in PLA and printing the gaskets at the moment. Didn't want to print in PETG cous of bad experience with it.

@3DEndeavors

Replying to @BergvikiT :

it was pretty warped. not a good seal around the tpu gasket and the ledge the light was on was so wavy it pulled the light strip off.

@StefanE.

Ich bekomme die 12mm LED nicht in den Ecken richtig rein. Hat mir jemand einen Tipp wie das am besten geknickt wird?

The designer has replied

@maCyo42

oha das Ding sieht echt sehr zäh aus. Ist aber definitiv frickelig. Ich hab die unten in die Ecke gedrückt und rechts nach unten und dann direkt geklebt.

@StefanE.

Replying to @maCyo42 :

Ja sehr frickelig. Sitze seit Stunden dran :(.

@Quantum.Grower

Any luck with the corner?

@KimKam

This came out great. I had started printing the remix for the P1S before moving over to the 12mm light strip version. I would like to see what lights people are using. I don't have an AMS (yet) but I think this is a great addition, even without it. Many thanks for the remix and to the original designer.

@dmrphy03

Looks great! How did you paint the logo and P1S on the front panel without AMS?

@KimKam

I used a Posca pen to colour it in. Im going to reprint the front to sections as they were printed before I decided to do the 12mm light version. Then I'll paint the indent again but with a closer colour to the accent parts

@MiniatureMan

Looks really great. If I see this right, the Original BLV - AMS Riser for X1C v1.3 had no front TPU gasket. What would you suggest we should print for your version ? Thank you.

The designer has replied

@maCyo42

😁👍 this https://makerworld.com/models/38916

@Quantum.Grower

Nice work on this 12mm version maCyo42! I uploaded a new profile that's single color and no ironing.

@drakko

Thanks for sharing your project. I've finally managed to complete it. When I began printing this, only the BLV v.1.3 was available, but given that it took me that long to complete it, I was able to use some of parts of your makes. Here are some shots of the completed project. The only thing left for me now is to figure out how to install the LED strip...