Hi!

I have made free-standing HSW walls before but I wanted something more sturdy and more built-for-purpose and this is what I came up with. Enjoy!

You can't print this on an A1 mini but if you don't have a larger printer, you can print a mini wall from here and these modular feet to get a similar stand.

The round shelves shown in the pictures are here.

If you would like to say thanks, you could buy me a few metres of plastic on Ko-Fi otherwise, please post a make and check out my other HSW models in this collection.

Print setting recommendations

Print the vertical wall piece with minimum 3 perimeters,

Print the horizontal piece with minimum 4 perimeters, 4 bottom layers and 5 top layers,

Print the feet with TPE or TPU - softer the better. The feet are optional.

Hardware

No additional hardware is required. Provisions are available for some M3 screws for additional security but these are completely optional (M3x10 cap screws or button head screws).