The infinite writer- Hueforge

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 200x174.37mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 2.2mm

Filaments Used:
PLA Generic Black Transmission Distance: 0.3
PLA Generic Basic Blue Gray Transmission Distance: 3
PLA BambuLab Grey Transmission Distance: 1
PLA BambuLab White Transmission Distance: 5
This print uses 4 unique filaments

Swap Instructions:
Start with Black
At layer #9 (0.8mm) swap to Blue Gray
At layer #15 (1.28mm) swap to Grey
At layer #22 (1.84mm) swap to White for the rest.

Enjoy