Hueforge of Lee Jae Dong, The Tyrant, the best zerg of starcraft broodwar.
Print at 100% infill with a layer height of 0.04mm with a base layer of 0.16mm
The Model is 200x125mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 1.6mm and the Actual Depth is 1.6mm
Filaments Used:
PLA BambuLab Matte Charcoal Transmission Distance: 0.1
PLA BambuLab Basic Green Transmission Distance: 2
PLA BambuLab Basic Mistletoe Green Transmission Distance: 5
PLA PolyLite Green Transmission Distance: 1
PLA BambuLab Basic Yellow Transmission Distance: 5.2
PLA BambuLab Matte Ivory White Transmission Distance: 3.4
This print uses 6 unique filaments
Swap Instructions:
Start with Charcoal
At layer #13 (0.64mm) swap to Green
At layer #17 (0.8mm) swap to Mistletoe Green
At layer #19 (0.88mm) swap to Green
At layer #21 (0.96mm) swap to Yellow
At layer #30 (1.32mm) swap to Ivory White for the rest.