My very first try in Hueforge and wanted to share it. Its my own original picture too. Inspired by Starcraft and Nova.
The profile should make it printable without any changes.
I printed it with layers:
This print uses 4 unique filaments
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 200x200mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 2.2mm
Swap Instructions:
Start with Black
At layer #8 (0.72mm) swap to Purple
At layer #14 (1.2mm) swap to Orange
At layer #19 (1.6mm) swap to White for the rest.