Michael Myers - Halloween - HueForge

https://makerworld.com/en/models/469455#profileId-378839

Michael Myers portrait - Halloween - HueForge

https://makerworld.com/en/models/471447#profileId-381067

Jason Voorhees - Friday 13th - HueForge

https://makerworld.com/en/models/472720#profileId-382609

Jigsaw - Saw - Billy the Puppet - HueForge

https://makerworld.com/en/models/475924#profileId-386786

Pennywise - IT - HueForge
https://makerworld.com/en/models/444576#profileId-350867

Freddy Krueger - Nightmare - HueForge

Can be rescaled just remember not to change the Z axis.

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 150x150mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 3mm and the Actual Depth is 2.8mm

Filaments Used:
PLA+ Sunlu Black Transmission Distance: 0.6
PLA+ Sunlu Red Transmission Distance: 6
PLA+ Sunlu Orange Transmission Distance: 5
PLA+ Sunlu White Transmission Distance: 5
 

Swap Instructions:
Start with Black
At layer #10 (0.88mm) swap to Red
At layer #18 (1.52mm) swap to Orange
At layer #25 (2.08mm) swap to White for the rest.
 

Thank you!!