Portrait of Billy the Puppet - Saw - HueForge

Can be rescaled just remember not to change the Z axis.

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 150x150mm in size
You may print at higher layer heights below the Min Depth of 0.8mm
The Max Depth is 3.4mm and the Actual Depth is 3mm

Filaments Used:
PLA+ Sunlu Black Transmission Distance: 0.6
PLA Overture Matte Blu Navy Transmission Distance: 1.6
PETG Sunlu Red Transmission Distance: 7.5
PLA+ Sunlu Orange Transmission Distance: 5
PLA+ Sunlu White Transmission Distance: 5

!!!! It appears you have mixed filament types. Be certain this is what you want. !!!!!

Swap Instructions:
Start with Black
At layer #10 (0.88mm) swap to Blu Navy
At layer #12 (1.04mm) swap to Red
At layer #21 (1.76mm) swap to Orange
At layer #29 (2.4mm) swap to White for the rest.

Thank you!