Michael Myers - Portrait - HueForge
Can be rescaled just remember not to change the Z axis.
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 150x150mm in size
You may print at higher layer heights below the Min Depth of 0.72mm
The Max Depth is 2mm and the Actual Depth is 1.9mm
Filaments Used:
PLA+ Sunlu Black Transmission Distance: 0.6
PLA+ Esun ePLA-Lite Fire Engine Red Transmission Distance: 5
PLA+ Sunlu Grey Transmission Distance: 2
PLA+ Sunlu Beige Transmission Distance: 10
PLA+ Sunlu White Transmission Distance: 5
This print uses 5 unique filaments
Swap Instructions:
Start with Black
At layer #9 (0.8mm) swap to Fire Engine Red
At layer #13 (1.12mm) swap to Grey
At layer #17 (1.44mm) swap to Beige
At layer #20 (1.68mm) swap to White for the rest.
Thank you!