Thanks to cagriahiskali for the original model.

This is an add-on for “AMS Side Desiccant Magnet Version (FAST-CLEAN-EASY)”

This version is for people who have not yet printed the magnet holders from the original version, so you can just print this instead.

If you have already printed the magnet holders from the original version, then you can print the add-on brace from here…
Brace for "AMS Side Desiccant Magnet Version"

By using this brace, you will greatly increase the holding power of your magnates (no more slipping when opening and closing the lid of the AMS), and it makes it less fiddly to install and remove when replacing the desiccant.

I have included models for the original 10x3mm magnets, and 8x4mm magnets.

I only had 8x4mm magnates, so the extra holding power has really helped in my case. And my AMS is in a hard to reach place, so the improved ease of use has been a great help too.

*Note: The photo of the printed item is of the non-combined version, because I have no need to print this again, just to take a photo.
The magnet holding parts on this version are smaller, because they are incorporated into the frame.