AMS Desiccant Box (Easy-to-print Version)
Copyright Claim
AMS Desiccant Box (Easy-to-print Version)
Boost
95
225
26
Print Profile(1)
0.2mm layer, 2 walls, 15% infill
Designer
9.6 h
1 plate
Boost
95
225
26
9
250
105
Released
Description
If you have issues printing other AMS desiccant models like me, this is the easy-to-print model.
With the redesign 45deg instead of the radius corner and thicker wall, you should have no problem printing without a support structure.
The model is compatible with Xiaomi Smart Thermometer 2, model number: LYWSD03MMC.
The meter is separated from the desiccant to avoid wrong readings due to direct surroundings with the desiccant.
STEP files are included, enjoy print.
Comment & Rating (26)
All
用PLA+打印了两次 都会在同一高度撞喷嘴 有什么好的办法吗 第二次加了裙边
The designer has replied
0
Reply
可否拍张底部的照片来看看？我是使用托竹的高温板，Bed 55度。如果您的没能站好，可以尝试重新Bed calibration，或提高床温至55度，或涂上一层托竹的胶水。希望可以帮到您。
(Edited)0
Reply
我有贴合的问题都会使用它，薄薄一层就能抓得很紧，是一个很不错的胶水，您可以试试看。
0
Reply
Replying to @3dprintloh
三次打印都是热床55度 使用金色PEI板 重新打印了一个小的 我在打印到颈部时调节速度为静音模式 目前看效果很好 前两次失败不是因为底部粘接不牢 加了裙边依旧是被喷嘴撞跑（监控看到的） 减速后没有发生这个问题 总之非常感谢
0
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
Looks very good
The designer has replied
1
Reply
The colour looks nice 👍🏻
0
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
Spaghetti issue with one of the smaller containers at the end of the print. I was able to salvage the print and make it work. other than that it was a good print.
The designer has replied
1
Reply
Could take some photos of the spaghetti?
0
Reply
Replying to @3dprintloh
I would but I already took care of it and no SD card for a time lase. Sorry.
0
Reply
Replying to @tinmancan
No worried. Great to know you got it done. 👍🏻
0
Reply
Hello, What size are the holes? Will desiccant of the sizes 2-4mm fall through?
The designer has replied
1
Reply
Hi Vonith, the holes are 1mm, should be no problem for your desiccant.
0
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
Super Set
The designer has replied
0
Reply
Thank you ☺️
0
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
only printed the two out side pieces look good and fit perfectly
1
Reply
Boosted
Print Profile
0.2mm layer, 2 walls, 15% infill
1
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
1
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
1
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
1
Reply
License
This user content is licensed under a
Creative Commons Attribution-Noncommercial-Share AlikeRelated Models
© 2024 MakerWorld