A 150mm x 100mm print of a bear walking through the forest.
Print at 100% infill with a layer height of 0.04mm with a base layer of 0.16mm
Filaments Used:
- PLA Kingroon Black Transmission Distance: 0.4
- PLA+ Sunlu Dark Gold (Dark Brown) Transmission Distance: 1.8
- PLA+ Sunlu Coffee Transmission Distance: 3
- PLA Kingroon White Transmission Distance: 8
Swap Instructions:
- Start with Black
- At layer #15 (0.72mm) swap to Dark Gold (Dark Brown)
- At layer #18 (0.84mm) swap to Coffee
- At layer #27 (1.2mm) swap to White for the rest.