Here are two parametric models for use in fusion 360 to create magnetic mounts for tools for the HSW / Honeycomb storage wall.

One is for cylindrical magnets, load the model into fusion 360, choose modify and select change parameters. There are two defineable paramets, one for the diameter of the magnet, one for the depth.

NOTE - The depth paramter needs to be input as a minus, for example a 5mm depth is entered as -5mm.

The second is for square or rectangular magnets. This has parameters for height, width and depth.

I've included stl/step files for a 6x3mm clinder and a 5x5x5mm square magnet.

Make sure that you measure the magnets accuratly tro get a snug fit. I have designed a set of measuring gauges to help with this if needed. Link below.

https://makerworld.com/en/models/18716#profileId-17490