Cactus Magnets Miniatures by anselor

anselor

Household>Decor

Print Profile(5)

All

P1S

P1P

X1 Carbon

X1E

A1 mini

PLA 0.2mm nozzle, 0.1mm layer, 4 walls, 15% infill

Designer

47.2 h

3 plates

4.7(6)

PLA 2-color 0.2mm nozzle, 0.08mm layer, 4 walls, 15% infill

Designer

8.5 h

3 plates

5.0(2)

PLA 3-color 0.2mm nozzle, 0.08mm layer, 4 walls, 15% infill

Designer

47.2 h

3 plates

One color - 0.2mm nozzle, 0.08mm layer, 4 walls, 15% infill

8.5 h

3 plates

4.0(1)

Click to see more

Open in Bambu Studio

Boost

344

469

369

Released

Description

A selection of miniature cactus magnets or desk ornaments.

I'm learning and having fun with this. Feedback letting me know how your print went would be greatly appreciated.

If you're feeling generous and like what you see, Buy Me a Coffee or just Send me a tip.

Comment & Rating (29)

@Crycket

For some reason my print registered as canceled, so it won't let me rate this, but they came out great! The magnets fit well. The only thing is that the tri-colour ones added significant time to the project, if I were to do them again, I would do a two colour and paint the nubs.

The designer has replied

@anselor

Thank you! I went ahead and added a 2-color profile.

@dresende

Print Profile

PLA 0.2mm nozzle, 0.1mm layer, 4 walls, 15% infill

lost one of the cactus in the process 😞

The designer has replied

@anselor

Sorry :-( Based on your bulging layers you may want to check if everything is tightened up correctly.

@dustydumptruck

Boosted

Print Profile

PLA 2-color 0.2mm nozzle, 0.08mm layer, 4 walls, 15% infill

I shank them down and turned them into earrings. great model.

@tooling_lee

Print Profile

PLA 0.2mm nozzle, 0.1mm layer, 4 walls, 15% infill

(Edited)

The designer has replied

@anselor

Thanks! Glad you like it

@CookingWSmoke

do you have any suggestions for scaling to fit 8x3 magnets?

The designer has replied

@anselor

If you take the 6x3mm version in the slicer and scale it up by 32% it gives about 8.2mm diameter at a 4mm depth. an 8mm magnet should stick just fine with a 1mm gap.

@anselor

Another option, keeping the same size, would be to cut out an 8x3mm magnet hole in the back. I just tried it in the slicer by creating negative cylinder 8mmx3mm.