BambuLab A1 Temperature tower
Remixed by
Copyright Claim
BambuLab A1 Temperature tower
Remixed by
Boost
49
161
33
Print Profile(2)
Default Print Profile
Designer
2.3 h
1 plate
A1 0.2mm layer, 2 walls, 15% infill (Standard Settings)
1.8 h
1 plate
Boost
49
161
33
1
924
205
Released
Description
The included .3mf files include the needed gcode modifications
Usage Instructions:
1. Click on “Raw Model Files” and choose the file you want to use (PLA for regular temperatures, PETG for high temperatures)
2. Open the .3mf file using Bambu studio, click on “Slice Plate” and then “Print Plate”.
IMPORTANT: You cannot run this directly via the mobile app (the mobile app does not support custom gcode).
All my BambuLab Temperature Tower models:
Comment & Rating (33)
All
ive tried loading this file, but there are no temp changes. Ive uploaded the file through the studio, and ive opened the file using right-click, open with, and no temp changes. I know I am doing something wrong, I just don't know what. do you happen to have any suggestions?
Thanks
Michael
The designer has replied
0
Reply
Im getting it figured out, slowly lol
0
Reply
Replying to @ThisGuy
Did you download the file to a PC, or tried to run it directly from the mobile app?
0
Reply
@Alex.M
I have the same issue.
Is this model for A1 or A1 mini? I have the A1 and when opening the 3mf I see it has multiple temperatures by layer, but won't print as the wrong system preset is selected (A1 mini). Changing to A1 preset seems to lose the gcode and therefore it becomes one temperature.
edit: got it working, and it's now printing. I unzipped the 3mf and edited project_settings.config to remove all mentions of "mini" then saved, re-zipped and opened in Studio. I'm a complete noob to 3D printing/BambuStudio so maybe there's an easier way to do that, I don't know.
(Edited)0
Reply
Print Profile
Default Print Profile
helped me a lot thank you, easy to print
1
Reply
Might this be an amateur issue in regards to the temperatures? The file comes with 9 layers - 9 colors - 9 temperatures. For the lack of AMS I thought I need to "delete" all the colors. If you do so the model will have only one color but also only 1 temperature. We need to keep everything, right?
(Edited)
The designer has replied
0
Reply
You don't need that at all.
Please see usage instructions I posted for this model:
1. Click on “Raw Model Files” and choose the file you want to use (PLA for regular temperatures, PETG for high temperatures)
2. Open the .3mf file using Bambu studio, click on “Slice Plate” and then “Print Plate”.
0
Reply
Print Profile
Default Print Profile
works fine
0
Reply
Print Profile
Default Print Profile
worked as expected
0
Reply
Print Profile
Default Print Profile
Bambulab A1 Bambu filament basic
(Edited)
0
Reply
Print Profile
Default Print Profile - Old
hat bei mir nicht funktioniert mit den automatischen Wechsel der Temperatur
The designer has replied
0
Reply
Are you running it according to instructions?
0
Reply
Replying to @Alex.M
I think so
0
Reply
Replying to @ceylan.dar
According to this?
Usage Instructions:
1. Click on “Raw Model Files” and choose the file you want to use (PLA for regular temperatures, PETG for high temperatures)
2. Open the .3mf file using Bambu studio, click on “Slice Plate” and then “Print Plate”.
IMPORTANT: You cannot run this directly via the mobile app (the mobile app does not support custom gcode).
0
Reply
Print Profile
A1 0.2mm layer, 2 walls, 15% infill (Standard Settings)
still not understand how to use it
0
Reply
Please see "Usage Instructions".
Please note they need to be executed on a computer.
0
Reply
It works well, but it would be nice if there was a version with increasing temperature, even starting from 190C
The designer has replied
0
Reply
You can find it here:
https://www.printables.com/model/335144-bambu-studio-temperature-tower-all/files
Download the file: TEST BambuLab - Temperature tower (PLA 190-230) 20230412.3mf
(Edited)0
Reply
Print Profile
Default Print Profile
helped me diagnose my problem. thanks
0
Reply
Related Models
© 2024 MakerWorld