Multiboard Door Mount/Hanger: Single & Double Side

NOTE: For most models, it is worth reading the description carefully, and for some it is even necessary.

Hanger - a holder for Multiboard panels for doors and other similar objects (e.g., glass).

Available in two versions:

• Single-sided (Multiboard Push-Fit on one side)
• Double-sided (Multiboard Push-Fit on both sides)

The downloadable profile includes several pre-made sizes - door/panel widths: 2, 3, 5, 10, 15, 17.6, 20, 25, and 30 millimeters. However, you can use the customize option to create virtually any size.

However, even if you generate a model tailored to your needs using the “customize” option, I still recommend downloading the print profile and placing your generated model into it. This way you’ll have all the parameters ready without having to set them manually (the parameters linked to each specific profile can be found above).

The thickness is 2 millimeters, so it is a compromise between thinness and durability.

The holder adds a classic distance to the Multiboard "from the wall", so that you can use all the accessories and optionally run the cable/wire behind the board.
 

→ Click and check out our other projects for Multiboard! ←

Filament in Print Profiles

The filament specified in print profiles is usually just a guideline. It simply must be there. But most often – unless the model description specifically states that a given element must be printed with a specific filament – you can easily change it to the type you want to print the model with. Of course, when making such a decision, it's worth considering not only the type of filament you have, but also what will actually be best for the given print (model, application).

You can change the material type as needed while creating the print (Bambu Studio, Bambu Handy).