Spider-Man Stained Glass - Hueforge by Canadian Gamer

Canadian Gamer

Generative 3D Model>Hueforge & Lithophane

Print Profile(1)

All

P1S

P1P

X1 Carbon

X1E

Adaptive layer heights - 0.08mm layer, 2 walls, 100% infill

Designer

5.6 h

1 plate

5.0(1)

Open in Bambu Studio

Boost

Released

Description

In his origin story, Spider-Man gets his superhuman spider-powers and abilities after being bitten by a radioactive spider. These powers include superhuman strength, agility, reflexes, stamina, durability, coordination, and balance; clinging to surfaces and ceilings like a spider; and detecting danger with his precognition ability called "spider-sense". He builds wrist-mounted "web-shooter" devices that shoot artificial spider-webs of his own design, which he uses both for fighting and for web-swinging across the city.

-----

The rest of my comic hueforge collection can be found here:

https://makerworld.com/en/u/4065522623/collections/549689

I have assigned the model to have a variable layer print height, which means that the first 4 layers of the model will print with a 0.16 layer height, and switch to a 0.08 layer height for the details. If you use my uploaded print profile this will save you time on your print as the first 0.64mm is just to provide stability to the print for display.

Final Size is 200x200mm
If you resize the model from 200 x 200 make sure you do NOT scale the Z axis or the print colours will not be in the same position

If you like my work and want to help with the costs of filament donations can be made here:

https://www.paypal.com/donate/?hosted_button_id=9BVH6Q453Y2K8

Please post a picture of your printed copy! I'd love to see it!

— Printing Instructions---

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:
PLA BambuLab Basic Black Transmission Distance: 0
PLA BambuLab Basic Blue Gray Transmission Distance: 3
PLA Sunlu Red Transmission Distance: 5
PLA BambuLab Basic Jade White Transmission Distance: 5

Swap Instructions:
Start with Black
At layer #13 (1.12mm) swap to Blue Gray
At layer #16 (1.36mm) swap to Red
At layer #21 (1.76mm) swap to Jade White for the rest.

Comment & Rating (3)

@GoGoGirl

Great Design! Thank you! Printed on a X1C. FYI, your layers transferred in as: Start with Black Layer 10 change to Blue Layer 13 change to red Layer 18 change to white I printed using these, trusting they were right even though they differed from your description. It turned out great! I used basic PLA black, white, and red, and Bambu Lab Cobalt Blue Metallic.

(Edited)

The designer has replied

@CanadianGamer

Thank you for sharing! And if you could rate as well it would be much appreciated, the ratings help earn points which I use for filament for more prints! The layers in the profile do not match the description because I built in 3 adaptive layers at the start. I've gotten better at explaining what that means on my more recent uploads :) but the first 4 layers print at 0.16 (which is three less 0.08 layers, which is why those numbers are off, but they match the mm height listed.