Stained Glass Mushroom

The base image used to make this was made using AI image generation.

I used the Lithophane setting in Hueforge to make these.

This is printed in two parts. The two parts are glued back to back to make the final product.

Here are the specific colors with transmission distances that I used.

Please note that for some of the transmission distances I had to print test samples and got them visually as close as I could. They may not be 100% exact.

BambuLabs Basic Jade White - TD 5.0

Hatchbox Beige - TD 3.5

Hatchbox True Red - TD 4.0

Hatchbox Light Blue - TD 3.2

BambuLabs Basic Green - TD 2.0

Hatchbox Black - TD 0.2

The .3mf file is already set up with the correct color swaps, but I will put the color swaps below if you decide to use the raw .stl files.

Settings in Bambu Studio

All settings are default except the ones specified below.

0.08mm Extra Fine

Quality:

Layer height - 0.04

Initial layer height - 0.16

Slice gap closing radius - 0

Strength:

Top shell layers - 0

Top shell thickness - 0

Bottom shell layers - 999

Sparse infill density - 100

Sparse infill pattern - Rectilinear

Detect narrow internal solid infill - False

Ensure vertical shell thickness - False

Speed:

Inner wall - 200 mm/s

Sparse infill - 150 mm/s

Internal solid infill - 150 mm/s

Overhang speed (in order) - 0 mm/s, 50 mm/s, 30 mm/s, 10 mm/s

Gap infill - 200 mm/s

Others:

Prime tower - False

Part 1 - Red Plate

Start with White

At layer 4 swap to Beige

At layer 9 swap to Red

At layer 27 swap to Black for the rest

Part 2 - Blue and Green

Start with White

At layer 4 swap to Blue

At layer 20 swap to Green

At layer 31 swap to Black for the rest