Stained Glass Sunflower
The base image used to make this was made using AI image generation.
I used the Lithophane setting in Hueforge to make these.
This is printed in two parts. The two parts are glued back to back to make the final product.
Here are the specific colors with transmission distances that I used.
Please note that for some of the transmission distances I had to print test samples and got them visually as close as I could. They may not be 100% exact.
BambuLabs Basic Jade White - TD 5.0
BambuLabs Basic Yellow - TD 6.0
Hatchbox True Orange - TD 5.0
BambuLabs Basic Green - TD 2.0
Hatchbox Black - TD 0.2
The .3mf file is already set up with the correct color swaps, but I will put the color swaps below if you decide to use the raw .stl files.
Settings in Bambu Studio
All settings are default except the ones specified below.
0.08mm Extra Fine
Quality:
Layer height - 0.04
Initial layer height - 0.16
Slice gap closing radius - 0
Strength:
Top shell layers - 0
Top shell thickness - 0
Bottom shell layers - 999
Sparse infill density - 100
Sparse infill pattern - Rectilinear
Detect narrow internal solid infill - False
Ensure vertical shell thickness - False
Speed:
Inner wall - 200 mm/s
Sparse infill - 150 mm/s
Internal solid infill - 150 mm/s
Overhang speed (in order) - 0 mm/s, 50 mm/s, 30 mm/s, 10 mm/s
Gap infill - 200 mm/s
Others:
Prime tower - False
Part 1 - Yellow and Orange Plate
Start with White
At layer 5 swap to Yellow
At layer 18 swap to Orange
At layer 41 swap to Black for the rest
Part 2 - Green
Start with White
At layer 4 swap to Green
At layer 19 swap to Black for the rest
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.