Connor McDavid Hueforge printed with a 0.2mm nozzle.

Sample print was all with Bambu Labs basic PLA with Overture Black and White PLA.

Swap Instructions:
Start with Black
At layer #6 (0.36mm) swap to Blue
At layer #11 (0.56mm) swap to Yellow
At layer #12 (0.6mm) swap to Red
At layer #17 (0.8mm) swap to Beige
At layer #18 (0.84mm) swap to Blue
At layer #23 (1.04mm) swap to Orange
At layer #28 (1.24mm) swap to Jade White for the rest.