Combo - Flipper Zero Extended Box - Wifi Dev Board Storage - Original Foam Remixed by anthonywashingtonllc

Remixed by

anthonywashingtonllc

Tools>Organizers

Print Profile(2)

All

X1 Carbon

P1S

P1P

X1E

0.16mm layer, 2 walls, 15% infill

4.8 h

2 plates

4.8(12)

0.16mm layer, 2 walls, 15% infill

4.8 h

2 plates

Open in Bambu Studio

Boost

120

102

Released

Description

A flipper Zero storage case which allows you to use the foam that comes in the factory case for both the flipper zero and the USB Cord. In the top lid, behind the foam, you can also store the wifi dev board with or without the minimalist case installed on the dev board. I've used six m3x25 screws to secure the lid and clasps. This model can also store 2 extra sd cards in the upper lid.

Comment & Rating (19)

@TtotheK

Easy Print! PLA-CF case, ABS Latch

The designer has replied

@anthonywashingt

Looks great!

@kadaranwar07

This print turned out perfectly! The remix it is based on gave me issues with the sunken text, so I was glad to find this version with text flush with the lid. I bought my flipper secondhand and don't have the original foam, so I modeled a quick TPU square with a cutout to put in the top of the lid and help keep the WiFi dev board from falling out. The only issue I have is that the minimalist case has an option to use screws, instead of threaded inserts, and it seems that the screws model backplate doesn't fit in this case. I've taken off the back plate for now, but I'd love to be able to fit it in the lid with the backplate on.

@user_118860222

Boosted

Print Profile

0.16mm layer, 2 walls, 15% infill

Beautiful print exceptional quality.

(Edited)

@emrahsavas

Print Profile

0.16mm layer, 2 walls, 15% infill

@joshua.kraling

Can you post a link for the minimalist case? I can't seem to find it...

@TtotheK

I printed this file from MW “Case for Flipper Zero Wi-Fi Module with Ruthex threaded inserts + Marauder skull logo version” and I omitted the back piece. I was going to alter the back and remove the edges and print it when I have time.

@kadaranwar07

Replying to @TtotheK :

I did print this one, but I printed the one w/ M2 nuts/bolts, not threaded inserts. I have threaded inserts so *could* reprint if needed, though I'm having trouble getting it to fit. I ended up printing the bottom from the original one this is remixed from, and then the top from this model because I couldn't get the embossed text in the other model to print correctly. Now I just need to get my WiFi Dev board to fit!!

@Papi.Chulo

Print Profile

0.16mm layer, 2 walls, 15% infill

print came out great!!

@byfox1982

Print Profile

0.16mm layer, 2 walls, 15% infill

parfait vraiment bien fait et j’adore

@PenZance3d

Boosted

Print Profile

0.16mm layer, 2 walls, 15% infill

both my flipper and myself thank you. fits perfectly and printed very clearly

@kevinpira

Print Profile

0.16mm layer, 2 walls, 15% infill

came out really good, found a minimalist case for Wiki on Thingyverse for everyone who is searching for it (thing:6060554) fits perfect in the case ^^