Previously, I released a set of storage box models and received a lot of feedback. This time, based on everyone's suggestions, I have upgraded the storage box models and provided four sizes for download. They are easy to print, require no hardware, and can be used directly after printing.

The available sizes are:

• M Single Layer: 16×7.5×3.3cm
• M Double Layer: 16×7.5×4.7cm
• S Single Layer: 8×7.5×3.3cm
• S Double Layer: 8×7.5×4.7cm

Key updates:

1. Increased hinge clearance. The original hinge design was good, but increasing the clearance improves printing tolerance.
2. Redesigned latch. The previous latch was difficult to open after closing. The new latch is easier to open and has greatly improved both printing tolerance and structural stability.

Tip: To improve the success rate of printing, clean the print bed and apply glue stick to the bed before printing. If the filament is damp, it may cause the hinges to stick, so please ensure the filament is dry.

Your support is my greatest motivation to keep creating. If you like my work, giving a boost is the best way to support me.

之前我发布过一套收纳盒模型，得到了很多反馈。这次结合大家的意见，我对收纳盒模型进行了升级，并提供了四种尺寸供大家下载。打印十分方便，无需五金件，打印完成后可以直接使用。

提供的尺寸如下：

• M单层：16×7.5×3.3cm
• M双层：16×7.5×4.7cm
• S单层：8×7.5×3.3cm
• S双层：8×7.5×4.7cm

主要更新内容：

1. 铰链间空隙增加。原来版本的铰链其实是很好的，这次增大空隙只是为了增加打印的容错率。
2. 设计了全新的锁扣。之前的锁扣在关闭后开启有些困难，新的锁扣更易开启，并且无论是打印容错率还是结构稳定性都得到了很大的提升。

提示：为了提高打印成功率，建议在打印前清洁热床，并对热床涂抹胶水。如果耗材受潮，可能导致铰链粘连，请确保耗材干燥。

你的助力是我不断创作的最大支持。如果喜欢我的作品，给出一个助力（boost）是对我最大的支持。