I was looking for an AMS stand that was a bit sturdier than the models previously available for download so I designed this one. This design incorporates just two pieces that can be printed in one shot in the x1c/p1p and then popped together quickly to form a strong bond. Each half of the stand can be printed inside the x1c/p1p in any orientation, or both halves at once in upright or upside down orientation. I printed this “upside down” as it used less support material.

This design is intended for spaces like mine (on my kitchen counter) where there is sufficient counter depth to slide the stand backwards (or sliding lower AMS forwards) when needing to access the lower AMS.

The file will import to Bambu Studio with both halves together. The “separate as objects” button in Bambu Studio lets you move each half independently.

You can slice how you'd like, but in case you're interested, I sliced this with 3 walls, 15% gyroid fill and I created some modifier boxes around the hooks and hook receptacles and made those parts a 100% rectilinear fill for a solid “lock”. I also added 60% rectilinear fill by the handle as it gets fairly thin there, although I doubt that was needed. I used Bambu PLA Marble filament for both the white and red portions (and Bambu PLA Support for the support interface). It used about 1.5 rolls of the white filament.

This is 250mm tall so it can print upright (or upside down) in the x1c/p1p without any modifications to basic settings.

note, this does not fit all versions of the AMS stand. It fits the ones I have (both purchased in August, 2023 in Canada). It may be a good idea to first print just the top slots to check compatibility with your AMS before printing the entire model. You can adjust the Z height of the model in Bambu Studio (only material above the print bed will get printed).