PinSpool holder v3 for Honeycomb
Print Profile(1)
Bill of Materials
Description
A coil of Bambulab filament could not be placed on the original holder, I reduced it a bit. I cut body into two parts.
Remove the supports from the "Spoolholder part1" and glue the part "Spoolholder part2" into the hole (two-component epoxy glue or instant glue works reliably). Slide the "Pin" into the "Shaft" (one on each side, hex side in). Place 608 bearings on the outside of the Pins.
You can also look at my other accessories for BambuLab printers.
Silicone nozzle wiper A1/A1 mini
Mount A1 mini PTFE Tube Connector
Ultralight honeycomb/full hotend cover A1 series
Ultralight honeycomb/full poop deflector A1 series
A1 mini PTFE coupling PC4 M10
Z axis dust cover TPU (P1/X1 series)
Ultrathin handle cover P1/X1 series (0.2 nozzle)
Bambulab silicone sock hotend P1/X1 series
AMS feeder PTFE adapter TPU
Bambulab P1/X1 nozzle wiper
LED light riser P1/X1
Boost Me (for free)
If you like the model, I will be happy if you support me in my work with a boost. Thank you.
This remix is based on
License
Comment & Rating (15)