Brown Bear : https://makerworld.com/en/models/102546#profileId-109203

Grayscale Bear : https://makerworld.com/en/models/102545#profileId-109202

This model has been carefully designed to look great with 6 colors.

It is printed with filament swaps and can be printed with or without an AMS.

No AMS necessary to print, but it does make it easier.

No AMS :

• Slice the file
• Change the filament swaps in the model to pauses
• Replace the filament color every pause according to the instruction below

1 AMS or AMS-lite (A1 mini , A1) :

• When starting the print use existing slots for extra colors
• 1st color : slot A1
• 2nd color : slot A2
• 3rd color : slot A3
• 4th color : slot A4
• 5th color : slot A2
• 6th color : slot A3
• When you are done printing the a specific slot, swap out the color mid print without pausing.

2 AMS:

• Print away!

When scaling the model, scale in the X and Y direction only. Leave Z at 100%.

Please ignore warning of the floating regions, they are the Antennae of the largest butterfly

Color Settings :

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:
PLA+ IIID Max Black Transmission Distance: 0.5
PLA+ IIID Max Gray Night Transmission Distance: 0.8
PLA+ JAYO Meta Grey Transmission Distance: 3.4
PLA+ IIID Max White Transmission Distance: 5.6
PLA+ IIID Max Black Transmission Distance: 0.5
PLA+ IIID Max Burnt Orange Transmission Distance: 3.6
PLA+ IIID Max Yellow Transmission Distance: 5
PLA+ IIID Max White Transmission Distance: 5.6

Swap Instructions:
Start with Black
At layer #7 (0.64mm) swap to Gray Night
At layer #10 (0.88mm) swap to Grey
At layer #13 (1.12mm) swap to White
At layer #20 (1.68mm) swap to Black
At layer #22 (1.84mm) swap to Burnt Orange
At layer #25 (2.08mm) swap to Yellow
At layer #28 (2.32mm) swap to White for the rest.